<html>
<body>
<font size=3>Here are some log excerpts from
/var/log/mythtv/mythbackend<br><br>
2008-02-27 22:40:47.945 mythbackend version: 0.20.20070821-1
<a href="http://www.mythtv.org/" eudora="autourl">www.mythtv.org<br>
</a>2008-02-27 22:40:47.945 Enabled verbose msgs: all<br>
2008-02-27 22:40:47.946 AutoExpire: Found 0 recorders w/max rate of 0
MiB/min<br><br>
2008-02-27 22:40:48.615 Encoder card 1 free space -1<br>
2008-02-27 22:40:48.616 Encoder card 2 free space -1<br><br>
# dmesg | grep ivtv<br>
ivtv: Start initialization, version 1.0.0<br>
ivtv0: Initializing card #0<br>
ivtv0: Autodetected Hauppauge card (cx23416 based)<br>
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)<br>
ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)<br>
ivtv0: Encoder revision: 0x02060039<br>
ivtv0: Autodetected WinTV PVR 500 (unit #1)<br>
tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0)<br>
tuner 2-0060: chip found @ 0xc0 (ivtv i2c driver #0)<br>
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)<br>
cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)<br>
wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)<br>
ivtv0: Registered device video0 for encoder MPEG (4 MB)<br>
ivtv0: Registered device video32 for encoder YUV (2 MB)<br>
ivtv0: Registered device vbi0 for encoder VBI (1 MB)<br>
ivtv0: Registered device video24 for encoder PCM audio (1 MB)<br>
ivtv0: Registered device radio0 for encoder radio<br>
ivtv0: Initialized card #0: WinTV PVR 500 (unit #1)<br>
ivtv1: Initializing card #1<br>
ivtv1: Autodetected Hauppauge card (cx23416 based)<br>
ivtv1: Unreasonably low latency timer, setting to 64 (was 32)<br>
ivtv1: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)<br>
ivtv1: Encoder revision: 0x02060039<br>
tuner 3-0043: chip found @ 0x86 (ivtv i2c driver #1)<br>
tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1)<br>
cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)<br>
wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #1)<br>
ivtv1: Correcting tveeprom data: no radio present on second unit<br>
ivtv1: Autodetected WinTV PVR 500 (unit #2)<br>
ivtv1: Registered device video1 for encoder MPEG (4 MB)<br>
ivtv1: Registered device video33 for encoder YUV (2 MB)<br>
ivtv1: Registered device vbi1 for encoder VBI (1 MB)<br>
ivtv1: Registered device video25 for encoder PCM audio (1 MB)<br>
ivtv1: Initialized card #1: WinTV PVR 500 (unit #2)<br>
ivtv: End initialization<br><br>
-- Mache<br><br>
At 10:31 PM 2/27/2008, Mache Creeger wrote:<br>
<blockquote type=cite class=cite cite="">I fixed my tuner problem for
about one hour and taking the advice of having all my machines running on
the same mythtv rev I updated everything to 0.20.2-175. As a result, I
now have the same Tuner 1 is unavailable/Tuner 2 is unavailable on the
Tuner Status page. I shut down the SBE and FE to eliminate them as
variables. I then deleted the video sources and the capture cards using
mythtv-setup on the MBE, rebooted, and reinstalled the capture cards,
video sources, and inputs. Still nothing. This is exactly what I had
before but now I do not have video4linux to delete to solve the problem.
<br><br>
I then went back to mythtv-setup, and re-deleted the capture cards and
video sources and then yum erased ivtv-firmware and ivtv-kmdl. After
rebooting, I reinstalled ivtv-firmware and ivtv-kmdl, rebooted, and then
with mythtv-setup re-configured the WinTV PVR 500, the video sources, and
the inputs. Still nothing. <br><br>
The WinTV PVR 500 loads fine in dmesg with no errors, but when
mythbackend goes to initialize the recorder it comes back with none
found. Turning on --verbose all, does not yield any enlightening
information. <br><br>
Can someone tell what type of logging I can turn on the resolve this
problem?<br><br>
-- Mache</font></blockquote></body>
</html>