<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
Chris Keegan wrote:
<blockquote
cite="mid:d2877a570801201152m11f8ef6bp350a6cb93bfe7a9f@mail.gmail.com"
type="cite">
<pre wrap="">Hi All,
This is all pretty new to me and despite having been going at this for
a couple of weeks, I don't seem to be able to make any progress so any
insights would be much appreciated.
Here's the results (tail /var/logs/messages) of doing (rmmod cx8800,
rmmod cx88xx, modprobe i2c_scan=1 card=5 tuner=63,
modprobe cx8800):
kernel: [180077.710839] cx2388x v4l2 driver version 0.0.6 loaded
kernel: [180077.711670] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 21
(level, low) -> IRQ 22
kernel: [180077.711726] CORE cx88[0]: subsystem: 107d:6611, board:
Leadtek Winfast 2000XP Expert [card=5,insmod option]
kernel: [180077.711729] TV tuner 63 at 0x1fe, Radio tuner -1 at 0x1fe
kernel: [180077.834190] tuner 0-0043: chip found @ 0x86 (cx88[0])
kernel: [180077.834306] tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner)
kernel: [180077.837642] tuner 0-0060: All bytes are equal. It is not a TEA5767
kernel: [180077.837646] tuner 0-0060: chip found @ 0xc0 (cx88[0])
kernel: [180077.840427] tuner 0-0060: type set to 63 (Philips
FMD1216ME MK3 Hybrid Tuner)
kernel: [180077.843097] tuner 0-0060: type set to 63 (Philips
FMD1216ME MK3 Hybrid Tuner)
kernel: [180077.937726] cx88[0]: i2c scan: found device @ 0x86
[tda9887/cx22702]
kernel: [180077.947619] cx88[0]: i2c scan: found device @ 0xa0 [eeprom]
kernel: [180077.962047] cx88[0]: i2c scan: found device @ 0xc0 [tuner (analog)]
kernel: [180078.026649] cx88[0]: Leadtek Winfast 2000XP Expert config:
tuner=38, eeprom[0]=0x01
kernel: [180078.033239] input: cx88 IR (Leadtek Winfast 2000XP as
/class/input/input8
kernel: [180078.033556] cx88[0]/0: found at 0000:02:05.0, rev: 5, irq:
22, latency: 32, mmio: 0xe2000000
kernel: [180078.080894] cx88[0]/0: registered device video0 [v4l2]
kernel: [180078.081381] cx88[0]/0: registered device vbi0
kernel: [180078.081842] cx88[0]/0: registered device radio0
and here's the result of dmesg | grep cx2388:
[180077.710839] cx2388x v4l2 driver version 0.0.6 loaded
and dmesg | grep cx8800:
[ 38.458611] CORE cx88[0]: subsystem: 107d:6611, board: Leadtek
Winfast 2000XP Expert [card=5,autodetected]
[ 38.614539] cx88[0]: Leadtek Winfast 2000XP Expert config:
tuner=38, eeprom[0]=0x01
[ 38.614660] input: cx88 IR (Leadtek Winfast 2000XP as /class/input/input4
[ 38.614706] cx88[0]/0: found at 0000:02:05.0, rev: 5, irq: 22,
latency: 32, mmio: 0xe2000000
[ 38.734957] tuner 0-0043: chip found @ 0x86 (cx88[0])
[ 38.751554] tuner 0-0060: chip found @ 0xc0 (cx88[0])
[ 38.767240] cx88[0]/0: registered device video0 [v4l2]
[ 38.767273] cx88[0]/0: registered device vbi0
[ 38.767306] cx88[0]/0: registered device radio0
[180077.711726] CORE cx88[0]: subsystem: 107d:6611, board: Leadtek
Winfast 2000XP Expert [card=5,insmod option]
[180077.834190] tuner 0-0043: chip found @ 0x86 (cx88[0])
[180077.837646] tuner 0-0060: chip found @ 0xc0 (cx88[0])
[180077.937726] cx88[0]: i2c scan: found device @ 0x86 [tda9887/cx22702]
[180077.947619] cx88[0]: i2c scan: found device @ 0xa0 [eeprom]
[180077.962047] cx88[0]: i2c scan: found device @ 0xc0 [tuner (analog)]
[180078.026649] cx88[0]: Leadtek Winfast 2000XP Expert config:
tuner=38, eeprom[0]=0x01
[180078.033239] input: cx88 IR (Leadtek Winfast 2000XP as /class/input/input8
[180078.033556] cx88[0]/0: found at 0000:02:05.0, rev: 5, irq: 22,
latency: 32, mmio: 0xe2000000
[180078.080894] cx88[0]/0: registered device video0 [v4l2]
[180078.081381] cx88[0]/0: registered device vbi0
[180078.081842] cx88[0]/0: registered device radio0
>From all of which I think I can surmise that the driver is loading and
detecting the card correctly (but I have really no idea, it just looks
plausible).
But when I load MythTV nothing that I do when adding a capture capture
card yields any results and there are no errors in the mythtv back end
logs.
I don't think I've seen any recent posts anywhere where someone has
successfully got this card to work with MythTV so any response or help
would be great. I know I should probably give up and buy an easier
card to work with but there's a principal at stake!
Thanks again all and apologies in advance for my ignorance!
Chris...
_______________________________________________
mythtv-users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:mythtv-users@mythtv.org">mythtv-users@mythtv.org</a>
<a class="moz-txt-link-freetext" href="http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users">http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users</a>
</pre>
</blockquote>
<font size="+1">Does your card work with other TV apps such as xdtv?</font><br>
</body>
</html>