I have DVB-T up and running with a Hauppauge Nova-T 500 PCI except for ONE nagging problem. When I scan in mythtv-setup, all channels except a few doesn't work. But if I use dvb-apps/scan and create a channels.conf and then try to tzap it, I get a lock!
<br><br>da@brutus:~$ tzap "Aftonbladet TV7"<br>using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'<br>tuning to 794000000 Hz<br>video pid 0x0333, audio pid 0x0332<br>status 0b | signal 8a23 | snr 0000 | ber 001fffff | unc 0000045a |
<br>status 1f | signal 8a9a | snr 0000 | ber 00016d70 | unc 000001a6 | FE_HAS_LOCK<br>status 1f | signal 8ac3 | snr 0000 | ber 0001f290 | unc 00000000 | FE_HAS_LOCK<br>...<br><br>This is the contents of channels.conf (I have only the problematic channels in there right now):
<br>---<br>da@brutus:~$ cat .tzap/channels.conf<br>Aftonbladet TV7:794000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:819:818:810<br>Kanal Lokal Skane:794000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:8149:8148:8140
<br>---<br><br>Even if I import channels.conf into MythTV I get the same problem. No lock... Also, when I scanned with Kaffeine I can watch the channels. So I don't think the problem is with the Antenna.<br><br>I'm not really sure this is relevant, but I drop it here anyway: The frequency table has different "nets" and I think it's channels from _one_ of these nets that doesn't work. The table is here:
<a href="http://www.teracom.se/?page=5882">http://www.teracom.se/?page=5882</a> <br>And the transmitter is "Malmö Jägersro". It's Net 5. <br><br>I run Kubuntu 7.10 mythtv version "0.20.2-0ubuntu10", and a few-days-ago-old v4l-dvb from svn. Thanks for any help.
<br>
<br>/D<br><br>