Oh yeah, and on the DVB cards, you need to set them up as to allow on demand access or you'll get jacked up when switching between SD and HD.<br><br>
<div class="gmail_quote">On Dec 3, 2007 10:28 PM, Sean Goodpasture <<a href="mailto:goofygrin@gmail.com">goofygrin@gmail.com</a>> wrote:<br>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">
<div>OK, in my box, I've got the following in my modules.conf in /etc/modprobe.d:</div>
<div>alias char-major-81 videodev
<div class="Ih2E3d"><br>alias char-major-81-0 saa7134<br></div>options saa7134 card=90,90 disable_ir=1 tuner=68,68<br>options saa7134-alsa index=1,2,3<br>options dvb-core dvb_shutdown_timeout=0</div>
<div> </div>
<div>The 4th line is what sets up alsa correctly for me (remember I've got three cards).</div>
<div> </div>
<div>Here's my dmesg | grep saa as well:</div>
<div>
<div class="Ih2E3d">saa7130/34: v4l2 driver version 0.2.14 loaded<br></div>saa7133[0]: found at 0000:01:06.0, rev: 209, irq: 21, latency: 32, mmio: 0xfb007 000<br>saa7133[0]: subsystem: 17de:7352, board: Kworld ATSC110 [card=90,insmod option]
<div class="Ih2E3d"><br>saa7133[0]: board init: gpio is 100<br></div>saa7133[0]: i2c eeprom 00: de 17 52 73 ff ff ff ff ff ff ff ff ff ff ff ff
<div class="Ih2E3d"><br>saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff<br></div>
<div class="Ih2E3d">saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff <br></div>
<div class="Ih2E3d">saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff<br></div>
<div class="Ih2E3d">saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff<br></div>
<div class="Ih2E3d">saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff <br></div>
<div class="Ih2E3d">saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff<br></div>
<div class="Ih2E3d">saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff<br></div>
<div class="Ih2E3d">tuner 0-0061: chip found @ 0xc2 (saa7133[0])<br></div>
<div class="Ih2E3d">saa7133[0]: registered device video0 [v4l2] <br></div>
<div class="Ih2E3d">saa7133[0]: registered device vbi0<br></div>saa7133[1]: found at 0000:01:07.0, rev: 209, irq: 22, latency: 32, mmio: 0xfb004 000<br>saa7133[1]: subsystem: 17de:7352, board: Kworld ATSC110 [card=90,insmod option]
<div class="Ih2E3d"><br>saa7133[1]: board init: gpio is 100<br></div>saa7133[1]: i2c eeprom 00: de 17 52 73 ff ff ff ff ff ff ff ff ff ff ff ff
<div class="Ih2E3d"><br>saa7133[1]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff<br></div>
<div class="Ih2E3d">saa7133[1]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff <br></div>
<div class="Ih2E3d">saa7133[1]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff<br></div>
<div class="Ih2E3d">saa7133[1]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff<br></div>
<div class="Ih2E3d">saa7133[1]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff <br></div>
<div class="Ih2E3d">saa7133[1]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff<br></div>
<div class="Ih2E3d">saa7133[1]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff<br></div>saa7133[1]: registered device video1 [v4l2]<br>saa7133[1]: registered device vbi1 <br>saa7133[2]: found at 0000:01:08.0
, rev: 240, irq: 20, latency: 32, mmio: 0xfb005 000<br>saa7133[2]: subsystem: 17de:7350, board: Kworld ATSC110 [card=90,autodetected]<br>saa7133[2]: board init: gpio is 100 <br>saa7133[2]: i2c eeprom 00: de 17 50 73 ff ff ff ff ff ff ff ff ff ff ff ff
<br>saa7133[2]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff<br>saa7133[2]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff <br>saa7133[2]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<br>saa7133[2]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff<br>saa7133[2]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff <br>saa7133[2]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<br>saa7133[2]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff<br>saa7133[2]: registered device video2 [v4l2]<br>saa7133[2]: registered device vbi2
<div class="Ih2E3d"><br>DVB: registering new adapter (saa7133[0]).<br></div>
<div class="Ih2E3d">DVB: registering new adapter (saa7133[1]).<br></div>DVB: registering new adapter (saa7133[2]).
<div class="Ih2E3d"><br>saa7134 ALSA driver for DMA sound loaded<br></div>saa7133[0]/alsa: saa7133[0] at 0xfb007000 irq 21 registered as card 1 <br>saa7133[1]/alsa: saa7133[1] at 0xfb004000 irq 22 registered as card 2<br>
saa7133[2]/alsa: saa7133[2] at 0xfb005000 irq 20 registered as card 3<br>tuner 0-0043: chip found @ 0x86 (saa7133[0])
<div class="Ih2E3d"><br>tuner 0-0061: chip found @ 0xc2 (saa7133[0]) <br></div>tuner 1-0061: chip found @ 0xc2 (saa7133[1])<br>tuner 2-0061: chip found @ 0xc2 (saa7133[2])<br><br>I always have issues loading all the devices, do I actually added rmmod's and modprobes to my
rc.local (which I know isn't the right way, but it works so I don't complain). </div>
<div> </div>
<div>I don't remember why I had to add the tuner module, but there was some reason.</div>
<div> </div>
<div>Also, here's a couple other things... I setup the analog as a child card:</div>
<div>mysql> select cardid, videodevice, parentid, audioratelimit from capturecard;<br>+--------+-------------+----------+----------------+<br>| cardid | videodevice | parentid | audioratelimit |<br>+--------+-------------+----------+----------------+
<br>| 1 | 0 | 0 | NULL |<br>| 2 | 1 | 0 | NULL |<br>| 7 | 2 | 0 | NULL |<br>| 4 | /dev/video0 | 1 | 32000 |
<br>| 6 | /dev/video1 | 2 | 32000 |<br>| 8 | /dev/video2 | 7 | 32000 |<br>+--------+-------------+----------+----------------+<br>6 rows in set (0.00 sec)<br></div>
<div> </div>
<div>The card also is limited to 32000 on the analog, so make sure you limit it and on the recording profiles for analog, set the audio rate to 32000 or you'll get all sorts of funky sounding audio. You might have issues with this if you're outputting via SPDIF, depending on your card/receiver. I set an
asound.conf plug to auto convert it to 48000 and it works well.</div>
<div> </div>
<div>Good luck.<br><br></div>
<div>
<div></div>
<div class="Wj3C7c">
<div class="gmail_quote">On Dec 3, 2007 9:28 PM, Sean Goodpasture <<a href="mailto:goofygrin@gmail.com" target="_blank">goofygrin@gmail.com</a>> wrote:<br>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Other than the alsa issue (it's not sensing the carfs correctly, hence<br>the negative card ids), everything looks decent.
<br><br>IN /etc, there should be a modprobe or modules file with the saa<br>config (I can't remember which and i'm remote right now...)<br><br>in mythsetup, what happens when you add a dvb for card 1, does it see<br>
the right thing?<br>
<div>
<div></div>
<div><br><br>On 12/3/07, Steve Harrington <<a href="mailto:steve@the-harringtons.org" target="_blank">steve@the-harringtons.org</a>> wrote:<br>> Hello, thanks for you replies.<br>><br>> Well, I built my dad one and my dad-in-law one. I *intended* to put the two 110s in the
<br>> father-in-laws and the two 115s in my father's - but I could have messed up. I haven't configured<br>> my father's yet because it's a Christmas gift.<br>><br>> Anyway, here are the outputs of:
<br>> modprobe.conf does not exist on the system<br>> output of dmesg | grep saa:<br>> [ 38.914567] saa7130/34: v4l2 driver version 0.2.14 loaded<br>> [ 38.914764] saa7133[0]: found at 0000:02:01.0, rev: 240, irq: 22, latency: 64, mmio: 0xff5ff800
<br>> [ 38.914773] saa7133[0]: subsystem: 17de:7350, board: Kworld ATSC110 [card=90,autodetected]<br>> [ 38.914786] saa7133[0]: board init: gpio is 100<br>> [ 39.062446] saa7133[0]: i2c eeprom 00: de 17 50 73 ff ff ff ff ff ff ff ff ff ff ff ff
<br>> [ 39.062457] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff<br>> [ 39.062464] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff<br>> [ 39.062472] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<br>> [ 39.062480] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff<br>> [ 39.062487] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff<br>> [ 39.062495] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<br>> [ 39.062502] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff<br>> [ 39.194075] tuner 1-0061: chip found @ 0xc2 (saa7133[0])<br>> [ 39.299951] saa7133[0]: registered device video0 [v4l2]
<br>> [ 39.299988] saa7133[0]: registered device vbi0<br>> [ 43.968539] saa7133[1]: found at 0000:02:02.0, rev: 240, irq: 16, latency: 64, mmio: 0xff5ff000<br>> [ 43.968548] saa7133[1]: subsystem: 17de:7350, board: Kworld ATSC110 [card=90,autodetected]
<br>> [ 43.968559] saa7133[1]: board init: gpio is 100<br>> [ 44.119350] saa7133[1]: i2c eeprom 00: de 17 50 73 ff ff ff ff ff ff ff ff ff ff ff ff<br>> [ 44.119361] saa7133[1]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<br>> [ 44.119370] saa7133[1]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff<br>> [ 44.119377] saa7133[1]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff<br>> [ 44.119385] saa7133[1]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<br>> [ 44.119393] saa7133[1]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff<br>> [ 44.119401] saa7133[1]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff<br>> [ 44.119409] saa7133[1]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<br>> [ 44.166523] saa7133[1]: registered device video2 [v4l2]<br>> [ 44.166560] saa7133[1]: registered device vbi2<br>> [ 44.189438] saa7134 ALSA driver for DMA sound loaded<br>> [ 44.189472] saa7133[0]/alsa: saa7133[0] at 0xff5ff800 irq 22 registered as card -2
<br>> [ 44.189819] saa7133[1]/alsa: saa7133[1] at 0xff5ff000 irq 16 registered as card -1<br>> [ 44.362722] DVB: registering new adapter (saa7133[0]).<br>> [ 48.019829] DVB: registering new adapter (saa7133[1]).
<br>><br>> Thanks for the help to the both of you!<br>> _______________________________________________<br>> mythtv-users mailing list<br>> <a href="mailto:mythtv-users@mythtv.org" target="_blank">mythtv-users@mythtv.org
</a> <br>> <a href="http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users" target="_blank">http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users</a><br>><br></div></div></blockquote></div><br></div></div></blockquote>
</div><br>