<div>During my work,&nbsp;I have seen issues changing from one Intel card, to another Intel card of the same model, on both Microsoft and Linux OS's. If you are considering card failures I would recommend against the Intel branded cards (LSI cards themselves are OK, it just appears to be the Intel firmware). </div>  <div>With the Intel cards, if a disk fails, you should ensure that the array has properly rebuilt as well, would strongly recommend parity verification.</div>  <div>We have never had problems with 3ware cards, either with disks failing, or replacement cards and recovery of existing arrays. </div>  <div>The only time I have had an issue with a 3ware card, is when some single disk arrays (JBOD) were created, on a card with a BBU, then all of the disks were swapped out for new disks. The card got a bit confused and thought that the single disk arrays had gone bad. This was fixed by resetting the BBU and the card was happy again with no settings lost.</div> 
 <div>Gareth</div>  <div><BR><BR><B><I>Mikael Abrahamsson &lt;swmike@swm.pp.se&gt;</I></B> wrote:</div>  <BLOCKQUOTE class=replbq style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">On Mon, 24 Sep 2007, Roo wrote:<BR><BR>&gt; Is this only with 3ware cards or do most vendors have this <BR>&gt; compatibility?<BR><BR>According to the tomshardware test, all intel chipset raid controllers <BR>behave the same way, so ICH7, ICH8 and ICH9 are all compatible (well, they <BR>only tested upgrade to newer hw though).<BR><BR>-- <BR>Mikael Abrahamsson email: swmike@swm.pp.se<BR>_______________________________________________<BR>mythtv-users mailing list<BR>mythtv-users@mythtv.org<BR>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users<BR></BLOCKQUOTE><BR>