>> Plug and play...<br><br>There is a database that maps vendor/model ID's to device templates, which, for pvr cards, have rules about how to configure those cards in mythtv. If it's not auto-detected, you can still configure it the regular way in myth-setup, so you don't lose anything. If the vendor/model id is in the database you will see a message that says "TV Tuner detected", and it works out of the box without configuring. The video wasn't faked, and everything I did worked as shown. Admittedly since LinuxMCE is new it doesn't have a breadth of pnp cards, but in those cases you just use myth setup or provide the vendor/model id so it can be added to the pnp database. I do think that since making cards pnp makes the install so much faster and easier the best approach is just to expand the pnp database rather than get too frustrated.
<br><br>As far as I/R control, it supports USB UIRT, IRTrans and Tira out of the box. But you can still add other devices, you just have to do it the regular way rather than being pnp.<br><br>Regarding using serial devices to control your A/V gear, this is *MUCH* better than using infrared. I'm sure you've noticed that i/r isn't 100% reliable, and can be slow. I did use serial control for the sharp tv and yamaha receiver in the demo. But the Vizeo tv didn't have serial, so it was controlled with i/r, and it did work out of the box.
<br><br>The only lighting control that's totally pnp in LinuxMCE is ZWave. If you have a ZWave dongle the videos in the setup wizard guide you through the process of pairing lamp modules and flashes them inidividually so you can identify. Other lighting control, like X10, EIB, etc., is done by adding the lights in the admin panel.
<br><br>Sorry if it didn't work for you out of the box, and that the list of pnp hardware is still limited, but most users have said that when they do have compatible hardware LinuxMCE is the easiest to get going with Myth and it does work out of the box.
<br><br>Paul<br>