On 7/28/07, <b class="gmail_sendername">Ted Anderson</b> <<a href="mailto:tja@pobox.com">tja@pobox.com</a>> wrote:<div><span class="gmail_quote"></span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
I'm working on a fresh install of Knoppmyth R5F1. I previously had been<br>using a PVR 250 and added a PVR 500MCE when I decided to perform a clean<br>install. After auto-install finished and I tried to setup the tuners, I
<br>saw that only one of the PVR 500's tuners was detected. I tried<br>upgrading to ivtv 0.10.5 and got the same results. Here's my dmesg output:<br><br>ivtv: ==================== START INIT IVTV ====================
<br>ivtv: version 0.10.5 (tagged release) loading<br>ivtv: Linux version: 2.6.18-chw-13 SMP preempt mod_unload 586 gcc-4.1<br>ivtv: In case of problems please include the debug info between<br>ivtv: the START INIT IVTV and END INIT IVTV lines, along with
<br>ivtv: any module options, when mailing the ivtv-users mailinglist.<br>ivtv0: Autodetected Hauppauge card (cx23416 based)<br>ivtv0: Unreasonably low latency timer, setting to 64 (was 32)<br>ivtv0: loaded v4l-cx2341x-enc.fw
firmware (376836 bytes)<br>ivtv0: Encoder revision: 0x02060039<br>tveeprom 1-0050: Hauppauge model 32062, rev C199, serial# 8552317<br>tveeprom 1-0050: tuner model is TCL 2002N 5H (idx 99, type 50)<br>tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
<br>tveeprom 1-0050: audio processor is MSP3445 (idx 12)<br>tveeprom 1-0050: decoder processor is SAA7115 (idx 19)<br>tveeprom 1-0050: has no radio, has IR receiver, has no IR transmitter<br>ivtv0: Autodetected Hauppauge WinTV PVR-250
<br>tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)<br>saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)<br>msp3400 1-0040: MSP3445G-B8 found @ 0x80 (ivtv i2c driver #0)<br>ivtv0: Registered device video0 for encoder MPEG (4 MB)
<br>ivtv0: Registered device video32 for encoder YUV (2 MB)<br>ivtv0: Registered device vbi0 for encoder VBI (1 MB)<br>ivtv0: Registered device video24 for encoder PCM audio (1 MB)<br>tuner 1-0061: type set to 50 (TCL 2002N)
<br>ivtv0: Initialized Hauppauge WinTV PVR-250, card #0<br>ivtv: ====================== NEXT CARD ======================<br>ivtv1: Autodetected Hauppauge card (cx23416 based)<br>ivtv1: Unreasonably low latency timer, setting to 64 (was 32)
<br>ivtv1: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)<br>ivtv1: Retry loading firmware<br>ivtv1: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)<br>ivtv1: Error initializing firmware<br>ivtv1: Error -19 on initialization
<br>ivtv: ====================== NEXT CARD ======================<br>ivtv2: Autodetected Hauppauge card (cx23416 based)<br>ivtv2: Unreasonably low latency timer, setting to 64 (was 32)<br>ivtv2: loaded v4l-cx2341x-enc.fw
firmware (376836 bytes)<br>ivtv2: Encoder revision: 0x02060039<br>tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #2)<br>tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)<br>tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #2)
<br>tveeprom 2-0050: Hauppauge model 23552, rev E692, serial# 10303535<br>tveeprom 2-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)<br>tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)<br>tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx
<br>101, type 62)<br>tveeprom 2-0050: audio processor is CX25843 (idx 37)<br>tveeprom 2-0050: decoder processor is CX25843 (idx 30)<br>tveeprom 2-0050: has radio, has no IR receiver, has no IR transmitter<br>ivtv2: Correcting tveeprom data: no radio present on second unit
<br>ivtv2: Autodetected WinTV PVR 500 (unit #2)<br>cx25840 2-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #2)<br>wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #2)<br>ivtv2: Registered device video2 for encoder MPEG (4 MB)
<br>ivtv2: Registered device video34 for encoder YUV (2 MB)<br>ivtv2: Registered device vbi2 for encoder VBI (1 MB)<br>ivtv2: Registered device video26 for encoder PCM audio (1 MB)<br>tuner 2-0061: type set to 57 (Philips FQ1236A MK4)
<br>ivtv2: Initialized WinTV PVR 500 (unit #2), card #2<br>ivtv: ==================== END INIT IVTV ====================<br>ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-1/1-0018/ir0 [ivtv i2c<br>driver #0]<br><br>I've done a lot of searching, and most solutions point to problems with
<br>the firmware revision, etc. However, since one tuner is detected I'm<br>thinking the other tuner is plain bad. Is there any possibility there's<br>a software fix to this problem or do I need a new PVR 500? I'm hoping I
<br>don't have to get another one because returning things to newegg from an<br>APO address is a pain.<br></blockquote></div><br>Suggestion<br><br>Put it in a windows box and see if it works. Probably alot easier to troubleshoot.
<br><br>Kevin<br>