<html><body>
<p>Moreover, I got the following information when trying to load ivtv driver. It seems Ivtv drive can be loaded, but I still can't use MythTV's Watch TV function. One black screen would appear for one seconde and return back to MythTV mainmenu UI when pressing "Watch TV" button. <br>
<br>
<font size="4">Jul 10 14:33:21 localhost kernel: ivtv: ==================== START INIT IVTV ==================== <br>
Jul 10 14:33:21 localhost kernel: ivtv: version 0.10.3 (tagged release) loading<br>
Jul 10 14:33:21 localhost kernel: ivtv: Linux version: 2.6.20-1.2925.fc6 SMP mod_unload 686 4KSTACKS <br>
Jul 10 14:33:21 localhost kernel: ivtv: In case of problems please include the debug info between <br>
Jul 10 14:33:21 localhost kernel: ivtv: the START INIT IVTV and END INIT IVTV lines, along with<br>
Jul 10 14:33:21 localhost kernel: ivtv: any module options, when mailing the ivtv-users mailinglist.<br>
Jul 10 14:33:21 localhost kernel: ivtv0: Autodetected Hauppauge card (cx23416 based) <br>
Jul 10 14:33:21 localhost kernel: ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 20 (level, low) -> IRQ 21<br>
Jul 10 14:33:21 localhost kernel: ivtv0: Unreasonably low latency timer, setting to 64 (was 32)<br>
Jul 10 14:33:21 localhost kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)<br>
Jul 10 14:33:21 localhost kernel: iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x1060)<br>
Jul 10 14:33:21 localhost kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)<br>
Jul 10 14:33:21 localhost kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0<br>
Jul 10 14:33:21 localhost kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)<br>
Jul 10 14:33:21 localhost kernel: ivtv0: Encoder revision: 0x02060039 <br>
Jul 10 14:33:21 localhost kernel: tveeprom 0-0050: The eeprom says no radio is present, but the tuner type<br>
Jul 10 14:33:21 localhost kernel: tveeprom 0-0050: indicates otherwise. I will assume that radio is present. <br>
Jul 10 14:33:21 localhost kernel: tveeprom 0-0050: Hauppauge model 26139, rev G1A5, serial# 9534075<br>
Jul 10 14:33:21 localhost kernel: tveeprom 0-0050: tuner model is TCL MPE05-2 (idx 105, type 38)<br>
Jul 10 14:33:21 localhost kernel: tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) <br>
Jul 10 14:33:21 localhost kernel: tveeprom 0-0050: audio processor is CX25842 (idx 36)<br>
Jul 10 14:33:21 localhost kernel: tveeprom 0-0050: decoder processor is CX25842 (idx 29)<br>
Jul 10 14:33:21 localhost kernel: tveeprom 0-0050: has radio, has IR receiver, has IR transmitter <br>
Jul 10 14:33:21 localhost kernel: ivtv0: Autodetected Hauppauge WinTV PVR-150<br>
Jul 10 14:33:21 localhost kernel: ivtv0: reopen i2c bus for IR-blaster support<br>
Jul 10 14:33:21 localhost kernel: tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) <br>
Jul 10 14:33:21 localhost kernel: tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner)<br>
Jul 10 14:33:21 localhost kernel: tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)<br>
Jul 10 14:33:21 localhost kernel: cx25840 0-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0) <br>
Jul 10 14:33:21 localhost kernel: cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes)<br>
Jul 10 14:33:21 localhost kernel: wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)<br>
Jul 10 14:33:21 localhost kernel: ivtv0: Registered device video0 for encoder MPEG (4 MB) <br>
Jul 10 14:33:21 localhost kernel: ivtv0: Registered device video32 for encoder YUV (2 MB)<br>
Jul 10 14:33:21 localhost kernel: ivtv0: Registered device vbi0 for encoder VBI (1 MB)<br>
Jul 10 14:33:21 localhost kernel: ivtv0: Registered device video24 for encoder PCM audio (1 MB) <br>
Jul 10 14:33:21 localhost kernel: ivtv0: Registered device radio0 for encoder radio<br>
Jul 10 14:33:21 localhost kernel: tuner 0-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))<br>
Jul 10 14:33:21 localhost kernel: ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 <br>
Jul 10 14:33:21 localhost kernel: ivtv: ==================== END INIT IVTV ====================</font><br>
</body></html>