<br><div><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">Joe Borne wrote:<br>> I have three separate video sources set up in my mythtv box.
<br>><br>> 1. Analog Cable, accepting analog cable through the tuner - uses video<br>> source "analog" and has the capture card configured to use<br>> "/dev/video1" and "tuner1".<br>
><br>> 2. Firewire, accepting digital cable via firewire from the STB DCT<br>> 6416 - uses video source "Digital Cable".<br>><br>> 3. S-Video, accepting svideo output of digital cable from the DCT 6416
<br>> - uses video source "Digital Cable 5C".<br>><br>><br>> The problem is with #3. Although I have gone over the setup with a<br>> fine tooth comb, I can't find what's wrong. No matter what I do, I get
<br>> no channel listings in the guide for the channels handled by the<br>> S-Video input. I've forced the input to retrieve the channel data from<br>> the source in mythtv-setup, and I've performed multiple
<br>> mythfilldatabase operations with and without "--do-channel-updates.<br>><br>> I can tune to the channels and watch them, there's just no guide data<br>> so I can't schedule recordings etc.<br>
><br>> Can anyone suggest a solution? My only next step is to delete the<br>> input and re-create it in the hopes it forces the data to load.<br><br>How many lineups do you have defined at zap2it? You will have to have a
<br>separate lineup defined for each input. If you try to share the Digital<br>Cable lineup it will not work. The way zap2it works is they delete any<br>channels from their lineup that you do not use so when you run the<br>
firewire lineup it deletes all your 5c channels from your lineup so that<br>when you run the 5C data fill there are no channels listed at zap2it.<br>When I was running 3 lineups I had to have 2 zap2it accounts defined.<br>
The 3rd lineup used the second account.</blockquote><div><br>I actually have three lineups defined at zap2it with separate logins/passwords for each channel lineup. This arrangement worked perfectly for a month or so, then I tried to add a channel to the S-Video lineup. After that everything got messed up. I've done too many things to be able to accurately give you a log. But I can verify the above state is as I described.
<br></div></div>