Thanks Groepaz and Daniel for your help, I tried both of your suggestion (except compiling the lirc module into the kernel, which I really don't how to do that), but none have worked.<br><br>I have seen the following line from other people messages log file:
<br><span style="font-family: monospace;"><br></span>ivtv0: i2c attach to card #0 ok [client=Hauppauge IR (PVR150), addr=71]<br><br>but in my messages log file this line doesn't appear anywhere, here its content, I did just include the stuff from lirc and ivtv:
<br><br>May 29 01:48:03 localhost kernel: lirc_dev: no version for "struct_module" found: kernel tainted.<br>May 29 01:48:03 localhost kernel: lirc_dev: IR Remote Control driver registered, at major 61 <br>May 29 01:48:03 localhost kernel: /var/tmp/bach-build/BUILD/lirc-
0.8.2/drivers/lirc_imon/lirc_imon.c: Driver for Soundgraph iMON MultiMedian IR/VFD, v0.3<br>May 29 01:48:03 localhost kernel: /var/tmp/bach-build/BUILD/lirc-0.8.2/drivers/lirc_imon/lirc_imon.c: Venky Raju <<a href="mailto:dev@venky.ws">
dev@venky.ws</a>><br>May 29 01:48:03 localhost kernel: /var/tmp/bach-build/BUILD/lirc-0.8.2/drivers/lirc_imon/lirc_imon.c: imon_probe: found IMON device<br>May 29 01:48:03 localhost kernel: lirc_dev: lirc_register_plugin: sample_rate: 0
<br>May 29 01:48:03 localhost kernel: /var/tmp/bach-build/BUILD/lirc-0.8.2/drivers/lirc_imon/lirc_imon.c: imon_probe: Registered iMON plugin (minor:0)<br>May 29 01:48:03 localhost kernel: /var/tmp/bach-build/BUILD/lirc-0.8.2
/drivers/lirc_imon/lirc_imon.c: imon_probe: iMON device on usb<4:2> initialized<br><br>May 29 01:48:03 localhost kernel: ivtv: ==================== START INIT IVTV ====================<br>May 29 01:48:03 localhost kernel: ivtv: version
0.10.2 (tagged release) loading<br>May 29 01:48:03 localhost kernel: ivtv: Linux version: 2.6.20-1.2944.fc6 SMP mod_unload 686 4KSTACKS <br>May 29 01:48:03 localhost kernel: ivtv: In case of problems please include the debug info between
<br>May 29 01:48:03 localhost kernel: ivtv: the START INIT IVTV and END INIT IVTV lines, along with<br>May 29 01:48:03 localhost kernel: ivtv: any module options, when mailing the ivtv-users mailinglist.<br>May 29 01:48:03 localhost kernel: ivtv0: Autodetected Hauppauge card (cx23416 based)
<br>May 29 01:48:03 localhost kernel: ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 21 (level, low) -> IRQ 20<br>May 29 01:48:03 localhost kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0<br>May 29 01:48:03 localhost kernel: ivtv0: loaded
v4l-cx2341x-enc.fw firmware (376836 bytes)<br>May 29 01:48:03 localhost kernel: Floppy drive(s): fd0 is 1.44M<br>May 29 01:48:03 localhost kernel: FDC 0 is a post-1991 82077<br>May 29 01:48:03 localhost kernel: ivtv0: Encoder revision: 0x02060039
<br>May 29 01:48:03 localhost kernel: tveeprom 0-0050: Hauppauge model 26132, rev F1B2, serial# 10258655<br>May 29 01:48:03 localhost kernel: tveeprom 0-0050: tuner model is TCL M2523_5N_E (idx 112, type 50)<br>May 29 01:48:03 localhost kernel: tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
<br>May 29 01:48:03 localhost kernel: tveeprom 0-0050: audio processor is CX25841 (idx 35)<br>May 29 01:48:03 localhost kernel: tveeprom 0-0050: decoder processor is CX25841 (idx 28)<br>May 29 01:48:03 localhost kernel: tveeprom 0-0050: has no radio, has IR receiver, has IR transmitter
<br>May 29 01:48:03 localhost kernel: ivtv0: Autodetected Hauppauge WinTV PVR-150<br>May 29 01:48:03 localhost kernel: ivtv0: reopen i2c bus for IR-blaster support<br>May 29 01:48:03 localhost kernel: tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
<br>May 29 01:48:03 localhost kernel: cx25840 0-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0)<br>May 29 01:48:03 localhost kernel: cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes)<br>May 29 01:48:03 localhost kernel: wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
<br>May 29 01:48:03 localhost kernel: ivtv0: Registered device video0 for encoder MPEG (4 MB)<br>May 29 01:48:03 localhost kernel: ivtv0: Registered device video32 for encoder YUV (2 MB)<br>May 29 01:48:03 localhost kernel: ivtv0: Registered device vbi0 for encoder VBI (1 MB)
<br>May 29 01:48:03 localhost kernel: ivtv0: Registered device video24 for encoder PCM audio (1 MB)<br>May 29 01:48:03 localhost kernel: tuner 0-0061: type set to 50 (TCL 2002N)<br>May 29 01:48:03 localhost kernel: ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
<br>May 29 01:48:03 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 21<br>May 29 01:48:03 localhost kernel: ivtv: ==================== END INIT IVTV ====================<br><br>
May 29 01:48:23 localhost kernel: bttv: driver version 0.9.16 loaded<br>May 29 01:48:23 localhost kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture<br>May 29 01:48:23 localhost kernel: cx2388x v4l2 driver version
0.0.6 loaded<br>May 29 01:48:23 localhost kernel: lirc_i2c: chip found @ 0x71 (Hauppauge IR (PVR150))<br>May 29 01:48:23 localhost kernel: lirc_dev: lirc_register_plugin: sample_rate: 10<br>May 29 01:48:23 localhost lircd-0.8.2-CVS
[2941]: lircd(userspace) ready<br>May 29 01:48:23 localhost lircd-0.8.2-CVS[2941]: accepted new client on /dev/lircd<br>May 29 01:48:23 localhost kernel: /var/tmp/bach-build/BUILD/lirc-0.8.2/drivers/lirc_imon/lirc_imon.c: IR port opened
<br><br>thanks<br><br><div><span class="gmail_quote">2007/5/29, Daniel Agar <<a href="mailto:daniel@agar.ca">daniel@agar.ca</a>>:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
> Hello I have tried for countless hours to make the ir receiver of the<br>> pvr-150 to work, I have the one that come with a irblaster, but this is<br>> not<br>> a must for this one to work because I have a serial irblaster and anyway I
<br>> would need to patch the lirc if I want it to work, which is beyond my<br>> knowledge right now .<br>><br>> Everything seems to load correctly but I got nothing on the console when I<br>> start irw and press a button on my remote ( I know the card/ir
<br>> receiver/remote works, i tried them on windows).<br>><br>> By the way I try to install it on MythDora 4<br>><br>> Any help would be extremely appreciated.<br>><br>> Here is the contents of my files
<br>> ----------------<br>> /etc/modprobe.conf:<br>><br>> alias char-major-61-0 lirc_i2c<br>> alias char-major-61-1 lirc_serial<br>> options lirc_serial irq=4 io=0x3f8<br>> ####IR setup####<br>> install lirc_i2c /sbin/modprobe ivtv; /sbin/modprobe --ignore-install
<br>> lirc_i2c<br>> install lirc_serial setserial /dev/ttyS0 uart none; /sbin/modprobe<br>> --ignore-install lirc_serial<br>><br>> ----------------<br>> /etc/rc.d/rc.local<br>><br>> /sbin/modprobe lirc_i2c
<br>> /sbin/modprobe lirc_serial<br>> /usr/sbin/lircd --device=/dev/lirc0 --output=/dev/lircd<br>> /usr/sbin/lircd --driver=default --device=/dev/lirc1 --output=/dev/lircd1<br>> --pidfile=/var/run/lircd1.pid<br>
><br>> ------------------<br>><br>> /etc/lircd.conf<br>><br>> in this file I have the grayHauppauge remote and my cable box, I don't<br>> think<br>> I need to post it.<br>><br>> ------------------
<br>><br>> /etc/sysconfig/lircd<br>><br>> #Options to lircd<br>> LIRCD_OPTIONS=<br>><br>> ------------------<br>><br>> here is the list of currently loaded lirc modules:<br>><br>> lsmod | grep lirc
<br>><br>> lirc_serial 15104 0<br>> lirc_i2c 11780 0<br>> i2c_core 24897 11<br>> cx88xx,bttv,lirc_i2c,i2c_ec,wm8775,cx25840,tuner,nvidia,ivtv,i2c_algo_bit,tveeprom<br>
> lirc_imon 17924 1<br>> lirc_dev 16292 3 lirc_serial,lirc_i2c,lirc_imon<br>><br>> --------------------<br>><br>> and here is the lirc devices<br>><br>> ls -l /dev/lirc*
<br>><br>> lrwxrwxrwx 1 root root 5 May 28 18:46 /dev/lirc -> lirc0<br>> crw------- 1 root root 61, 0 May 28 18:46 /dev/lirc0<br>> crw------- 1 root root 61, 1 May 28 18:46 /dev/lirc1<br>> crw------- 1 root root 61, 2 May 28 18:46 /dev/lirc2
<br>> srw-rw-rw- 1 root root 0 May 28 18:46 /dev/lircd<br>> srw-rw-rw- 1 root root 0 May 28 18:46 /dev/lircd1<br>> prw-r--r-- 1 root root 0 May 28 18:46 /dev/lircm<br>><br>> Thanks<br><br>I use fc6 with a pvr 150 and IR. I don't have anything in
<br>/etc/modprobe.conf concerning lirc and I don't have fedora start lircd on<br>its own. I simply have the following in /etc/rc.local<br><br>modprobe lirc_i2c<br>/etc/init.d/lircd start<br><br>You might try using this, and you could simply have the /dev/lirc symlink
<br>point to the proper ir device. I don't have any options in my<br>/etc/sysconfig/lircd file.<br><br>_______________________________________________<br>mythtv-users mailing list<br><a href="mailto:mythtv-users@mythtv.org">
mythtv-users@mythtv.org</a><br><a href="http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users">http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users</a><br></blockquote></div><br>