<br><br><div><span class="gmail_quote">On 4/22/07, <b class="gmail_sendername">R. G. Newbury</b> <<a href="mailto:newbury@mandamus.org">newbury@mandamus.org</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<br>The post 12618 problem only affects scanning on the ATSC side of things.<br>Your post was unclear: do you have TWO different zap2it channel lineups?<br><br>When you switch modes it is as if you swapped cards completely. So you
<br>need a lineup distinct to NTSC channels. Your error message about wrong<br>modulation implies to me that you are trying to tune an NTSC channel,<br>using an ATSC-channel tuning method (because myth thinks it is dealing
<br>with an ATSC channel). That fails, of course.<br><br>If you HAVE defined 2 lineups, it sounds like your NTSC channel listing<br>has the same modulation value as the ATSC....<br><br>For NTSC tuning, your card would not (properly) use the dtv_multiplex
<br>table... which is the one place where modulation appears. (It should be<br>qam_256 for digital cable: in mysql:<br><br>select modulation from dtv_multiplex;<br><br>Geoff</blockquote><div><br>I was in mythtv-setup and I noticed that both my HD-5500 NTSC and PVR-350 were being assigned to /dev/video0. I know I can add something to /etc/modprobe.d/aliases to assign hardware to a specific devices. Does anyone know what I might put to fix this? Also when I originally went to get NTSC working I only had an analog listing in my zap2it account and I only setup my HD-5500 card with one input going to the NTSC connection and nothing to the ATSC side of the card in setup.
<br><br>TK<br></div><br></div><br>