there's also /etc/lirc/hardware.conf ;)<br>if lirc needs to load a kernel module at boot time, it has to be mentioned in that file. Or maybe you don't need a kernel module. In any case, you need to specifiy which lirc driver lircd should use, this has to be mentioned in this file as well. I have a IRA3-OEM universal receiver in my box, connected to an on-board COM port. I use /dev/ttyS1 as the IR device node and I do not need a kernel module, just the irman lib for driving the IR receiver (lirc supports libirman). <br><br>I hope this helps,<br>J.<br><br><b><i>Sreeram Kumar <Sreeramkumar@yahoo.com></i></b> wrote:<blockquote class="replbq" style="border-left: 2px solid rgb(16, 16, 255); margin-left: 5px; padding-left: 5px;"> Sorry for my earlier post. the subject was wrong.<br><br>Sreeram Kumar wrote:<br>> I bought the powerful one (24.99) from ebay's lirc<br>and mythtv store by mark (saturnpc.net). I<br>disconnected the hauppauge ir tx/rx and connected
the<br>above one to my serial port. I thought everything will<br>work magically :) nothing works. I used the lircd.conf<br>which was built on hauppauge remote. Also, I used the<br>lircd.conf from the source forge which controls my<br>dish box. How do I solve this puzzle now? Please let<br>me know<br><br>Thanks<br><br><br><br> <br>____________________________________________________________________________________<br>Get your own web address. <br>Have a HUGE year through Yahoo! Small Business.<br>http://smallbusiness.yahoo.com/domains/?p=BESTDEAL<br>_______________________________________________<br>mythtv-users mailing list<br>mythtv-users@mythtv.org<br>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users<br></blockquote><br><p> 
<hr size=1><a href="http://us.rd.yahoo.com/evt=49935/*http://games.yahoo.com">Bored stiff?</a> Loosen up...<br><a href="http://us.rd.yahoo.com/evt=49935/*http://games.yahoo.com">Download and play hundreds of games for free</a> on Yahoo! Games.