<pre><tt><tt>Hello All,<br><br>I got my sound issue resolved by dropping and recreating my <br>mythconverg database. Kinda of drastic, but no other settings <br>helped. I did have checked the "use pvr-350 TV/Out".<br><br>Now that one issue is solved, I have run into another...<br>If I have things configured to use the PVR-350 for video <br>and sound, other things like "MythVideo" do not have sound. <br>If I disable the use of the PVR-350 for output, sound plays.<br><br>Any ideas?<br><br>Thanks,<br>Kirk<br><br>>Message: 30<br>>Date: Sun, 14 Jan 2007 09:28:23 -0500<br>>From: "ryan patterson" <ryan.goat@gmail.com><br>>Subject: Re: [mythtv-users] PVR-350 TV-out + TV-sound<br>>To: "Discussion about mythtv" <mythtv-users@mythtv.org><br>>Message-ID:<br>> <877e3bc60701140628q5e283decne75a50914aad6509@mail.gmail.com><br>>Content-Type: text/plain; charset="iso-8859-1"<br>><br>>Did you check the setting "Use the pvr-350's tv out /
MPEG decoder" <br>>under<br>>utilities setup::setup::tv settings::playback? It sounds like you have <br>>the<br>>pvr-350 configured for the X server output but not for hardware <br>>playback.<br>><br>>If you have the pvr-350 setup correctly then you will get sound from <br>>mpeg<br>>video playback only from the pvr-350 and you will get all other sound<br>>(mp3's, mythvieo playback, transcoded playback, etc) from your <br>>soundcard.<br>><br>>On 1/13/07, Kirk Patton <kirk_patton@yahoo.com> wrote:<br>><br>> Hello,<br>><br>> I am running MythTV .20-0.2ubuntu2 on Ubuntu Edgy with ivtv 7.0 <br>drivers.<br>> I am using the frame buffer to display X on the TV. Everything works<br>> except that I am not able to get sound to go through the TV speakers. <br>Sound<br>> only goes through the sound card on the PC.<br>><br>> I have checked use PVR-350 for sound. I am able to get picture and <br>sound<br>> if
I bypass MythTV and simply "cat /dev/video48 > /dev/video16". <br>Might<br>> anyone have any idea why this would be the case and how to correct <br>it?<br>><br>> Thanks,<br>> Kirk<br>></tt></tt></pre>