I replaced my DVD R/W to a newer dual_layer drive. <br><br>Since doing none of the "Optical Disks" functionswork.<br><br>I know the hardware is detected, see dmegs below:<br><br>--snip ---<br>Probing IDE interface ide1...
<br>hdd: LITE-ON DVDRW SHW-160P6S, ATAPI CD/DVD-ROM drive<br>ide1 at 0x170-0x177,0x376 on irq 15<br>hda: max request size: 1024KiB<br>hda: 625142448 sectors (320072 MB) w/8192KiB Cache, CHS=38913/255/63, UDMA(100)<br>hda: cache flushes supported
<br> hda: hda1 hda2 hda3<br>hdb: max request size: 1024KiB<br>hdb: 976773168 sectors (500107 MB) w/16384KiB Cache, CHS=60801/255/63, UDMA(100)<br>hdb: cache flushes supported<br> hdb: unknown partition table<br>hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
<br>Uniform CD-ROM driver Revision: 3.20<br>libata version 1.20 loaded.<br>--snip--<br><br>I looked in /dev and found the dvd and cdrom were still linked to hdc.<br><br>So I deleted the links for dvd -> /dev/hdc and cdrom -> /dev/hdc and
<br>recreated them for dvd -> /dev/hdd and cdrom -> /dev/hdd<br><br>But that failed to fix the problem.<br><br>When I try to import a cd the screen just flashes a few time and then hangs until you hit escape,<br>and when it tries to burn a DVD, I get the following message in the
mythburn.log when it gets to where it should burn the DVD:<br><br>--snip--<br>Burning DVD-R image<br>Sent UDP/XML packet to IP <a href="http://255.255.255.255">255.255.255.255</a> and port: 6948<br>:-( unable to open64("/dev/dvd",O_RDONLY): No such device or address
<br>***********************************<br>MythTV BurnDVD stopped due to error<br>***********************************<br>Sent UDP/XML packet to IP <a href="http://255.255.255.255">255.255.255.255</a> and port: 6948<br>--snip--
<br><br>What am I missing? <br><br>I'm running KnoppMyth R5C7<br><br>Thanks <br><br>-- <br>Tim Scholl