<font color="black" face="Verdana,Arial,Helvetica" size="2"><font color="black" face="Verdana,Arial,Helvetica" size="2">>I've been trying to get this remote working for the past three nights. I've <br>>read the message boards, guides, etc and nothing seems to be working. I'm
<br>>guessing it's something simple and dumb... <br> <br>>If I run irw, I get all the codes showing up. But it doesn't interact with <br>>myth. I've attached some of my files and below are some of the things I've
<br>>seen online. <br> <br>>find / -name ati_remote.ko -print <br>>/lib/modules/2.6.15-1.2054_FC5/kernel/drivers/usb/input/ati_remote.ko <br>>/lib/modules/2.6.17-1.2157_FC5smp/kernel/drivers/usb/input/ati_remote.ko
<br>>/home/mythtv/ati_remote.ko <br>>(My kernel: 2.6.17-1.2157_FC5) <br> <br>>dmesg | grep ati <br>>Allocating PCI resources starting at 30000000 (gap: 20000000:dfff0000) <br>>Calibrating delay using timer specific routine..
3994.03 BogoMIPS <br>>(lpj=7988069) <br>>Uncovering SIS961 that hid as a SIS503 (compatible=1) <br>>Non-volatile memory driver v1.2 <br>>SIS5513: not 100% native mode: will probe irqs later <br>>usb usb1: configuration #1 chosen from 1 choice
<br>>usb usb2: configuration #1 chosen from 1 choice <br>>.usb 1-1: configuration #1 chosen from 1 choice <br>>lirc_atiusb: USB remote driver for LIRC v0.5 <br>>lirc_atiusb: Paul Miller <pmiller9[at]users.sourceforge.net>
<br>>lirc_atiusb[2]: X10 Wireless Technology Inc USB Receiver on usb1:2 <br>>usbcore: registered new driver lirc_atiusb <br> <br>>dmesg | grep lirc <br>>lirc_dev: no version for "struct_module" found: kernel tainted.
<br>>lirc_dev: IR Remote Control driver registered, at major 61 <br>>lirc_atiusb: USB remote driver for LIRC v0.5 <br>>lirc_atiusb: Paul Miller <pmiller9[at]users.sourceforge.net> <br>>lirc_dev: lirc_register_plugin: sample_rate: 0
<br>>lirc_atiusb[2]: X10 Wireless Technology Inc USB Receiver on usb1:2 <br>>usbcore: registered new driver lirc_atiusb <br> <br>>I don't have anything in /etc/modprobe.conf for the remote, when I added the <br>>following, lircd didn't start up.
<br>>alias char-major-61 lirc_atiusb <br>>alias lirc_dev lirc_atiusb <br> <br>>/sbin/lsmod | grep lirc ><br>>lirc_atiusb 15648 1 <br>>lirc_dev 12708 1 lirc_atiusb <br> <br>>irw
<br>>0000001448730000 00 MOUSE_DOWN atiusb <br>>000000144b760000 00 MOUSE_RIGHT_BTN atiusb <br>>000000144b760000 01 MOUSE_RIGHT_BTN atiusb <br>>00000014e9140000 00 8 atiusb <br>>00000014e9140000 01 8 atiusb
<br>>00000014d7020000 00 POWER atiusb <br>>00000014f21d0000 00 LEFT atiusb <br>>00000014f21d0000 01 LEFT atiusb <br>>00000014f7220000 00 DOWN atiusb <br>>00000014f31e0000 00 OK atiusb <br>>00000014e9140000 00 8 atiusb
<br>>00000014e5100000 00 4 atiusb <br>>00000014e10c0000 00 CH_DOWN atiusb <br> <br>>Is there info I'm missing? Thanks for any suggestions you have.<br><br>Hey Eric,<br><br>I've got a very similar setup to you, ATI remote wonder I with Fedora Core 4. I've got mine working so I might be able to help. I'll list a few points:
<br>- I don't have anything in modprobe<br>- my lircd.conf is slightly different than yours but surfing the web I found many versions out there and I think ATI released a few different remotes all under the same remote wonder I name. My gap is 227933 and yours was 227951, don't know if that will make a difference.
<br><br>What is the permission on dev/lirc*? (do a ls -l /dev/lirc*)<br>what are your permissions on /etc/lircd.conf (ls -l /etc/lircd.conf)<br><br>Lastly when I finally got it all working I was having a very similar issue where IRW saw the commands but myth did not. I rebooted and all was well, I don't really know why that was. Let me know and i'm sure we can get it.
<br><br>Ben<br></font></font><br><br><pre><br></pre>