On 4/24/06, <b class="gmail_sendername">matt mead</b> <<a href="mailto:m-mythtv@goof.com">m-mythtv@goof.com</a>> wrote:<div><span class="gmail_quote"></span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Allan Wilson wrote:<br>> Okay I got gscanbus and got it running by loading all my modules<br>> including<br>><br>> ieee1394<br>> ohci1394<br>> raw1394<br>><br>> and gscanbus can at least see a scientific-atlanta, inc device
<br>> connected to it and here is what it says:<br>><br>> Linux - ohci1394<br>> Physical ID: 1<br>> Link active: Yes<br>> Gap Count: 5<br>> PHY Speed: S400<br>> PHY Delay: <=144ns
<br>> IRM Capable: Yes<br>> Power Class: -1W<br>> Port 0: Not connected<br>> Port 1: Not connected<br>> Port 2: Connected to child node<br>> Init. reset: No<br>><br>> Scientific-Atlanta, Inc.
<br>> SelfID Info<br>> --------------------<br>> Physical ID: 0<br>> Link active: Yes<br>> Gap Count: 5<br>> PHY Speed: S400<br>> PHY Delay: <=144ns<br>> IRM Capable: Yes
<br>> Power Class: -1W<br>> Port 0: Not connected<br>> Port 1: Connected to parent node<br>> Init. reset: Yes<br>><br>> So it looks like it can see the device on port 2 but when I run
<br>> test-mpeg2 -r 2 | mplayer -vo xv -<br>> I get:<br>><br>> sh-3.00$ sudo ./test-mpeg2 -r 2 | mplayer -vo xv -<br>[snip]<br>> Cache fill: 0.00% (0 bytes)<br>><br>> But it just sits there and nothing happens. Does anyone have any
<br>> more suggestions? Thanks for any help<br><br>It still sounds to me like you're having trouble getting any data from it. As<br>long as you're using the right node, and it looks like you are, you should get<br>
something back on the non 5C channels, assuming it's enabled for the particular<br>SA3250HD that you have. Are you able to find out how to put the SA3250HD into<br>a diagnostic mode and confirm its firewire ports are active?
<br><br>> I also notice when I start the backend I see the following:<br>> FireChan, Error: Unable to get handle for port: 0<br>> So at least Myth is trying to open the port my da just can't figure out<br>> how to set it up. Thanks for any help.
<br><br>This looks to me as though you do not have the node setup properly in<br>mythtv-setup's definition for the firewire card.<br><br><br>-matt<br><br>--<br>matt mead<br><br><a href="http://collectivity.goof.com/">http://collectivity.goof.com/
</a><br>_______________________________________________<br>mythtv-users mailing list<br><a href="mailto:mythtv-users@mythtv.org">mythtv-users@mythtv.org</a><br><a href="http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users">
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users</a><br></blockquote></div><br>Okay finally got in touch with cable company and found out some interesting information. My SA3250HD does have working firewire ports when I hook it up to the firewire connections on my Sony KDS-R60XBR1 television. I did go in to the diagnostics mode on my cable box and when no firewire cables are connected it shows the firewire port is disabled and on the 1394 page shos a bunch of unavailables. Then if I connect my Sony to a firewire port the status of the port stays on unavailable but on the 1394 page I still have a bunch of unavailables but now I have a new line at the bottom:
<br><br>Name Model Dev Auth EID<br>Sony KDS-R60XBR1 Unavailable 08004604 0502A845<br><br>And I get a beutiful picture with sound through my firewire port on the TV. If I then hookup the cpu two my second firewire port nothing on the computer and now the above line disappears from my cable box and I don't get anything on the TV also. If I have only the computer hooked up then my 1394 page in the cable box diagnostics changes from disabled to unavailable and I don't have anything listed under the name model dev auth eid information line. Also another interesting fact is that on my cable box through Comcast in my area I can only receive HD channels over my firewire connection. I may have to take this to the
<a href="http://1394.org">1394.org</a> guys or to the Myth Developers list but thought I would try here first to see if anyone smarter than me had any ideas. Thanks for all the help so far and maybe one day I will be able to get this to work. By the way if anyone is curious I think the picture through firewire is better than through DVI and I don't get the blocks that I sometimes get through DVI. Thanks for any help
<br><br>Allan<br>