this is what i find in between the lines...not sure what all this means...<br><br>ivtv: ==================== START INIT IVTV ====================<br>ivtv: version 0.6.1 (development snapshot compiled on Wed Mar 29 19:14:09 2006) loading
<br>ivtv: Linux version: 2.6.16-1.2080_FC5 SMP gcc-4.1<br>ivtv: In case of problems please include the debug info between<br>ivtv: the START INIT IVTV and END INIT IVTV lines, along with<br>ivtv: any module options, when mailing the ivtv-users mailinglist.
<br>cx2388x v4l2 driver version 0.0.5 loaded<br>cx2388x dvb driver version 0.0.5 loaded<br>eth0: forcedeth.c: subsystem: 010de:cb84 bound to 0000:00:0a.0<br>ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20<br>GSI 19 sharing vector 0xC9 and IRQ 19
<br>ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 20 (level, low) -> IRQ 19<br>PCI: Setting latency timer of device 0000:00:04.0 to 64<br>nvidia: module license 'NVIDIA' taints kernel.<br>intel8x0_measure_ac97_clock: measured 58531 usecs
<br>intel8x0: clocking to 46955<br>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00<br>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40<br>ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)<br>ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
<br>GSI 20 sharing vector 0xD1 and IRQ 20<br>ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 20<br>ivtv0: Unreasonably low latency timer, setting to 64 (was 32)<br>tveeprom 2-0050: Hauppauge model 26052, rev C185, serial# 2882909
<br>tveeprom 2-0050: tuner model is TCL 2002N 6A (idx 85, type 50)<br>tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)<br>tveeprom 2-0050: audio processor is CX25843 (idx 37)<br>tveeprom 2-0050: decoder processor is CX25843 (idx 30)
<br>tveeprom 2-0050: has no radio, has IR remote<br>tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)<br>cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)<br>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
<br>sd 2:0:0:0: Attached scsi generic sg0 type 0<br>sd 3:0:0:0: Attached scsi generic sg1 type 0<br>cx25840 2-0044: loaded v4l-cx25840.fw firmware (13353 bytes)<br>wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)<br>
ieee1394: Initialized config rom entry `ip1394'<br>firmware_loading_store: unexpected value (0)<br>ivtv0: unable to open firmware v4l-cx2341x-enc.fw<br>ivtv0: did you put the firmware in the hotplug firmware directory?<br>
ivtv0 warning: failed loading encoder firmware<br>ivtv0 warning: Error loading firmware -3!<br>ivtv0: Error -3 initializing firmware.<br>ivtv0: Error -12 on initialization<br>ivtv: probe of 0000:01:07.0 failed with error -12
<br>ivtv: ==================== END INIT IVTV ====================<br><br><div><span class="gmail_quote">On 4/17/06, <b class="gmail_sendername">Carl Fongheiser</b> <<a href="mailto:carlfongheiser@gmail.com">carlfongheiser@gmail.com
</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;"><div style="direction: ltr;"><span class="e" id="q_10aa864cb0e10662_0">
On 4/17/06, <b class="gmail_sendername">Frank Armstrong</b> <<a href="mailto:farmstrong@gmail.com" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">farmstrong@gmail.com</a>> wrote:</span></div>
<div style="direction: ltr;"><div></div><div style="direction: ltr;"><span class="e" id="q_10aa864cb0e10662_2"><span class="gmail_quote"></span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div style="direction: ltr;"><div>i d/l the ivtv driver...according to the walkthrough....but when i try to do this part...<br># /usr/bin/ivtvctl -u 0x3000<br><br>i get this<br><br>not an ivtv driver device!<br>ioctl VIDIOC_S_STD ok
<br>Standard set to 00003000
<br><br>then when i do this...<br><br># /bin/dmesg |grep Initialized<br><br>i get this...<br><br>ieee1394: Initialized config rom entry `ip1394'</div>
<div> </div>
<div>it sees my pvr 150 on the pci bus...but when i try to test capture there's and I/O error...any help with this would be appreciated.</div></div></blockquote></span></div><div style="direction: ltr;"><div><br><br>What's in your dmesg output between the lines "==================== START INIT IVTV ====================" and "==================== END INIT IVTV ===================="? That would be the place to start. If you don't have those lines, then ivtv didn't get loaded.
<br><br>Carl Fongheiser<br></div><br></div><br>
</div><br>_______________________________________________<br>mythtv-users mailing list<br><a onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:mythtv-users@mythtv.org">mythtv-users@mythtv.org</a><br><a onclick="return top.js.OpenExtLink(window,event,this)" href="http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users" target="_blank">
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users</a><br><br><br></blockquote></div><br>