<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
Jesse Guardiani wrote:
<blockquote cite="mid4436B3B5.6060302@wingnet.net" type="cite">
<pre wrap="">Warren wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Jesse Guardiani wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Let us know what result you get. BTW, how are you "hard wiring" it to
the network if not via the PCMCIA?
Does it have an ethernet port?
Also, you mentioned before that the RCA video input on the back isn't
connected to the hardware encoder.
What's it connected to then?
Thanks!
</pre>
</blockquote>
<pre wrap="">You answered the ethernet port question (Realtek 8139 series to be
more specific). The video input IIRC is on the I2C bus and is
available as /dev/video1 (or one of those 0-2) through V4L. The ivtv
cards generally showed up as video3. Depending on the driver set
used, the Sigma chip was video1 and the direct input video0 or
sometimes visa-versa. I used to use softlinks so I could change them
easily when newer drivers were introduced.
</pre>
</blockquote>
<pre wrap=""><!---->
So are you saying there is one frame grabber and one hardware encoder?
</pre>
</blockquote>
There is one frame grabber. The hardware encoder is not there in the
4000.<br>
<br>
W<br>
</body>
</html>