<DIV style="font-family:Arial,sans-serif;">Hello.<BR>
I have a strange warning in ivtv:<BR>
<BR>
centos 4.2, ivtv 0.4.2<BR>
<BR>
<BR>
ivtv0 warning: i2c client addr: 0x43 not found for command 0x40085618!<BR>
ivtv0 warning: i2c client addr: 0x43 not found for command 0x402c5639!<BR>
ivtv0: Initialized WinTV PVR 150, card #0<BR>
ivtv: ==================== END INIT IVTV ====================<BR>
<BR>
dmesg | grep ivtv<BR>
ivtv: ==================== START INIT IVTV ====================<BR>
ivtv: version 0.4.2 (tagged release) loading<BR>
ivtv: Linux version: 2.6.9-34.ELsmp SMP 686 REGPARM 4KSTACKS gcc-3.4<BR>
ivtv: In case of problems please include the debug info between<BR>
ivtv: the START INIT IVTV and END INIT IVTV lines, along with<BR>
ivtv: any module options, when mailing the ivtv-users mailinglist.<BR>
ivtv0: Autodetected WinTV PVR 250 card (cx23416 based)<BR>
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)<BR>
tveeprom: ivtv version<BR>
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]<BR>
ivtv0: Corrected autodetection from WinTV PVR 250 to WinTV PVR 150<BR>
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0<BR>
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]<BR>
cx25840 0-0044: ivtv driver<BR>
cx25840 0-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0)<BR>
ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]<BR>
wm8775 0-001b: ivtv driver<BR>
wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)<BR>
ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]<BR>
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)<BR>
ivtv0: Encoder revision: 0x02050032<BR>
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)<BR>
ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)<BR>
ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)<BR>
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)<BR>
tuner: type set to 55 (TCL 2002MB) by ivtv i2c driver #0<BR>
ivtv0 warning: i2c client addr: 0x43 not found for command 0x40085618!<BR>
ivtv0 warning: i2c client addr: 0x43 not found for command 0x402c5639!<BR>
ivtv0: Initialized WinTV PVR 150, card #0<BR>
ivtv: ==================== END INIT IVTV ====================<BR>
<BR>
Best regards Claus<BR>
<BR>
<BR> <BR><HR>Get your FREE, LinuxWaves.com Email Now! --> http://www.LinuxWaves.com<BR>Join Linux Discussions! --> http://Community.LinuxWaves.com</DIV>