<br>
<br>
<div><span class="gmail_quote">On 3/5/06, <b class="gmail_sendername">Axel Thimm</b> <<a href="mailto:Axel.Thimm@atrpms.net">Axel.Thimm@atrpms.net</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
On Sun, Mar 05, 2006 at 12:30:47PM -0800, mrwester wrote:<br>> I just did smart upgrade on my mythtv system. FC4, everything from ATrpms.<br>> Everything is/was working great with kernel 2.6.15-1.1831. Upon upgrading
<br>> to 2.6.15-1.1833, IVTV seems to be broken, even after cold reboot. Using<br>> ivtv-kmdl-2.6.15-1.1833_FC4. I have a PVR-350, PVR-500 and (non IVTV<br>> Fusion5 HDTV) cards for video capture.<br><br><br>> ivtv: no version for "struct_module" found: kernel tainted.
<br>> ivtv: ==================== START INIT IVTV ====================<br>> ivtv: version 0.2.0 (tagged release) loading<br>> ivtv: Linux version: 2.6.15-1.1833_FC4 686 REGPARM 4KSTACKS gcc-4.0<br><br>You seem to have picked an older ivtv version. How did you install the
<br>kmdl?<br><br></blockquote></div>
I
used smart update/upgrade first and then the smart gui to pick lirc,
nvidia and ivtv modules, then I shutdown, wait 2 minutes and reboot.
The ivtv should be the same no matter which kernel is booted, right?
It's just the kernel module that should differ. Because when I boot
into the earlier kernel, I see:<br>
<br>
<br>
ivtv: ==================== START INIT IVTV ====================<br>
ivtv: version 0.4.3 (tagged release) loading<br>
ivtv: Linux version: 2.6.15-1.1831_FC4 686 REGPARM 4KSTACKS gcc-4.0<br>
<br>
I have no idea where the ivtv 0.2.0 is coming from. This OS was built
following Jarod's guide a month or two ago.. This seems odd to me, or
am I missing something? Any ideas? Thanks,<br>
<br>
Mike<br>
<br>
<br>
The full relevant parts from the log with the earlier kernel...<br>
ivtv: ==================== START INIT IVTV ====================<br>
ivtv: version 0.4.3 (tagged release) loading<br>
ivtv: Linux version: 2.6.15-1.1831_FC4 686 REGPARM 4KSTACKS gcc-4.0<br>
ivtv: In case of problems please include the debug info between<br>
ivtv: the START INIT IVTV and END INIT IVTV lines, along with<br>
ivtv: any module options, when mailing the ivtv-users mailinglist.<br>
ivtv0: Autodetected WinTV PVR 350 card (cx23415 based)<br>
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 9<br>
PCI: setting IRQ 9 as level-triggered<br>
ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [LNK1] -> GSI 9 (level, low) -> IRQ 9<br>
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)<br>
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]<br>
tveeprom 0-0050: Hauppauge model 48132, rev K168, serial# 7520207<br>
tveeprom 0-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47)<br>
tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)<br>
tveeprom 0-0050: audio processor is MSP4448 (idx 27)<br>
tveeprom 0-0050: decoder processor is SAA7115 (idx 19)<br>
tveeprom 0-0050: has radio, has IR remote<br>
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)<br>
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]<br>
saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)<br>
ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]<br>
saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)<br>
ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44]<br>
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)<br>
msp3400 0-0040: chip=MSP4448G-A2 +nicam +simple +simpler +radio mode=simpler<br>
ivtv0: i2c attach to card #0 ok [client=MSP4448G-A2, addr=40]<br>
msp3400 0-0040: msp34xxg daemon started<br>
tda9887 0-0043: chip found @ 0x86 (ivtv i2c driver #0)<br>
ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]<br>
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)<br>
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)<br>
ivtv0: Encoder revision: 0x02040024<br>
ivtv0 warning: Encoder Firmware can be buggy, use version 0x02040011 or 0x02050032.<br>
ivtv0: Decoder revision: 0x02020023<br>
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)<br>
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)<br>
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)<br>
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)<br>
ivtv0: Create encoder radio stream<br>
ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total)<br>
ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total)<br>
ivtv0: Create decoder VOUT stream<br>
ivtv0: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB total)<br>
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)<br>
tuner 0-0061: type set to 47 (LG NTSC (TAPE series))<br>
ivtv0: Initialized WinTV PVR 350, card #0<br>
ivtv: ====================== NEXT CARD ======================<br>
ivtv1: Autodetected WinTV PVR 150 card (cx23416 based)<br>
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 5<br>
PCI: setting IRQ 5 as level-triggered<br>
ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNK4] -> GSI 5 (level, low) -> IRQ 5<br>
ivtv1: Unreasonably low latency timer, setting to 64 (was 32)<br>
ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50]<br>
spurious 8259A interrupt: IRQ7.<br>
tuner 1-0060: TEA5767 detected.<br>
tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #1)<br>
ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=60]<br>
tuner 1-0060: type set to 62 (Philips TEA5767HN FM Radio)<br>
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1)<br>
ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=61]<br>
tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #1)<br>
ivtv1: i2c attach to card #1 ok [client=tda9887, addr=43]<br>
tveeprom 1-0050: Hauppauge model 23552, rev D492, serial# 7855692<br>
tveeprom 1-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)<br>
tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)<br>
tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)<br>
tveeprom 1-0050: audio processor is CX25843 (idx 37)<br>
tveeprom 1-0050: decoder processor is CX25843 (idx 30)<br>
tveeprom 1-0050: has radio, has no IR remote<br>
ivtv1: This is the first unit of a PVR500<br>
cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)<br>
cx25840 1-0044: loaded v4l-cx25840.fw firmware (13353 bytes)<br>
ivtv1: i2c attach to card #1 ok [client=cx25840, addr=44]<br>
wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1)<br>
ivtv1: i2c attach to card #1 ok [client=wm8775, addr=1b]<br>
ivtv1: Detected a TEA5767 radio tuner. Enabling radio support.<br>
ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)<br>
ivtv1: Encoder revision: 0x02040024<br>
ivtv1 warning: Encoder Firmware can be buggy, use version 0x02040011 or 0x02050032.<br>
ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)<br>
ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)<br>
ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)<br>
ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)<br>
ivtv1: Create encoder radio stream<br>
tuner 1-0061: type set to 57 (Philips FQ1236A MK4)<br>
ivtv1: Initialized WinTV PVR 500 (unit #1), card #1<br>
ivtv: ====================== NEXT CARD ======================<br>
ivtv2: Autodetected WinTV PVR 150 card (cx23416 based)<br>
ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNK1] -> GSI 9 (level, low) -> IRQ 9<br>
ivtv2: Unreasonably low latency timer, setting to 64 (was 32)<br>
ivtv2: i2c attach to card #2 ok [client=tveeprom, addr=50]<br>
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #2)<br>
ivtv2: i2c attach to card #2 ok [client=(tuner unset), addr=61]<br>
tda9887 2-0043: chip found @ 0x86 (ivtv i2c driver #2)<br>
ivtv2: i2c attach to card #2 ok [client=tda9887, addr=43]<br>
cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #2)<br>
cx25840 2-0044: loaded v4l-cx25840.fw firmware (13353 bytes)<br>
ivtv2: i2c attach to card #2 ok [client=cx25840, addr=44]<br>
wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #2)<br>
ivtv2: i2c attach to card #2 ok [client=wm8775, addr=1b]<br>
tveeprom 2-0050: Hauppauge model 23552, rev D492, serial# 7855692<br>
tveeprom 2-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)<br>
tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)<br>
tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)<br>
tveeprom 2-0050: audio processor is CX25843 (idx 37)<br>
tveeprom 2-0050: decoder processor is CX25843 (idx 30)<br>
tveeprom 2-0050: has radio, has no IR remote<br>
ivtv2: This is the second unit of a PVR500<br>
ivtv2: Correcting tveeprom data: no radio present on second unit<br>
ivtv2: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)<br>
ivtv2: Encoder revision: 0x02040024<br>
ivtv2 warning: Encoder Firmware can be buggy, use version 0x02040011 or 0x02050032.<br>
ivtv2: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)<br>
ivtv2: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)<br>
ivtv2: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)<br>
ivtv2: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)<br>
tuner 2-0061: type set to 57 (Philips FQ1236A MK4)<br>
ivtv2: Initialized WinTV PVR 500 (unit #2), card #2<br>
ivtv: ==================== END INIT IVTV ====================<br>
<br>
<br>