<br>Hi,<br><br>I am using 0.19 and am very happy. However, I have one small niggle that I cannot seem to resolve on my own. My mythbox is connected via VGA to a 40" Samsung LCD TV. The signal is provided by a Motorola DVi5000 digital cable decoder into a PVR350. The STB is set to output signals for a 16:9 TV.
<br><br>4:3 broadcasts are output on the S-Video connector from the STB with vertical black bars at the sides. (i.e. narrower than a normal 4:3 image.) 16:9 (anamorphic) broadcasts fill the entire area normally filled by the 4:3 signal.
<br><br>With the aspect ratio in mythtv set to 16:9 this means that 4:3 images are displayed correctly (i.e. stretched back to their correct horizonal dimensions) and 16:9 anamorphic broadcasts are stretched to fill the entire screen.
<br><br>My problem with this setup is that the 16:9 picture is not being completely stretched to fill the screen area. There is a thick black bar (around 100px) on the right side of the screen that is unused. 4:3 broadcasts are shown correctly, but also offset to the left.
<br><br>Is it possible to move the LiveTV image? The "overscan" settings do not help. How have other people dealt with this situation? Is it a case of setting the STB to output a 4:3 signal and then manually adjusting the aspect ratio for widescreen shows?
<br><br>Thanks for any advice and tips,<br>/micahel<br> <br>