<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
<tt><br>
<br>
Kevin Kuphal wrote:</tt>
<blockquote cite="mid43D65609.5070306@dls.net" type="cite">
<pre wrap=""><tt>Morten Rønseth wrote:
</tt></pre>
<blockquote type="cite">
<pre wrap=""><tt>Hi,
Jerry Rubinow wrote:
</tt></pre>
<blockquote type="cite">
<pre wrap=""><tt>On 1/24/06, Nathan A. Smith <a class="moz-txt-link-rfc2396E" href="mailto:nasa01@comcast.net"><nasa01@comcast.net></a> wrote:
</tt></pre>
<blockquote type="cite">
<pre wrap=""><tt>On Mon, 2006-01-23 at 21:54 -0700, Nathan A. Smith wrote:
</tt></pre>
<blockquote type="cite">
<pre wrap=""><tt>Hi,
I have setup my myth box (an Athlon 1800+, 756Meg Memory, 100G+
Harddrive space, nic, and the afore mentioned pvr-500). Everything
seems to run, but I only get static on "Tuner 4" and a very poor picture
(if I get one) on "tuner 6". I have coax and composite cables attached
to the main card, I don't have the daughter card installed. When I look
at "tuner status" it shows:
tuner 1: not available
tuner 2: not available
tuner 4: not recording
tuner 6: not recording
I followed the instructions off of mythtv.org and placed to tuner
devices:
/dev/video0 & /dev/video1
I also assigned video sources to both tuners (although there wasn't any
named tuner0 or tuner1 -- just 2 lines of tuner) and both composite
lines (both 0 & 1).
What else should I be trying?
Any help would be greatly appreciated
Nasa
</tt></pre>
</blockquote>
<pre wrap=""><tt>Ok,
I figured some log data would be helpful (I hope), so here it is:
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.4.1 (tagged release) loading
ivtv: Linux version: 2.6.12-12mdk 686 gcc-4.0
</tt></pre>
</blockquote>
</blockquote>
<pre wrap=""><tt>Have a look here <a class="moz-txt-link-rfc2396E" href="http://dl.ivtvdriver.org/ivtv/stable/ChangeLog">"http://dl.ivtvdriver.org/ivtv/stable/ChangeLog"</a>. Last
line of 0.4.1 changes. The input numbering has changed from previous
versions :-)
Had me in a frenzy for a while.
</tt></pre>
</blockquote>
<pre wrap=""><!----><tt>Also, the best way to fix this is to dump the capture card settings and
start over. I found that if I left them in and just tried to change the
mappings, I ended up with extra mappings in the database and had to
manually remove the old ones before it would work as Myth would keep
picking up on the old entries.
Kevin
________________</tt></pre>
</blockquote>
<tt><br>
Oh, and with 0.4.1 there are no longer 2 Tuners (Tuner0 & Tuner1) -
just the one tuner, namely "Tuner".<br>
<br>
<br>
<br>
Cheers,<br>
<br>
<br>
<br>
-Morten<br>
<br>
</tt>
<pre class="moz-signature" cols="72"><tt>--
-------------------------------------------------------------------
WEB-fx
Morten Lerskau Rønseth <a class="moz-txt-link-freetext" href="http://www.webfx.no">http://www.webfx.no</a>
Odinsvei 15c <a class="moz-txt-link-freetext" href="mailto:morten@webfx.no">mailto:morten@webfx.no</a>
1413 Tårnåsen Tlf.: (47) 6680 9191
Norway Mob : (47) 9343 4357</tt></pre>
</body>
</html>