HD-3000 card running on SuSE 10 both frontend and backend on the same box.<br>dmesg reports:<br>Linux video capture interface: v1.00<br>ivtv_tveeprom: module not supported by Novell, setting U taint flag.<br>cx2388x v4l2 driver version 
0.0.5 loaded<br>intel8x0_measure_ac97_clock: measured 52870 usecs<br>intel8x0: clocking to 48000<br>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5<br>ACPI: PCI Interrupt 0000:00:0a.0[A] -&gt; Link [LNKB] -&gt; GSI 5 (level, low) -&gt; IRQ 5
<br>cx88[0]: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22,autodetected]<br>TV tuner 52 at 0x1fe, Radio tuner -1 at 0x1fe<br>i2c-algo-bit.o: (0) scl=1, sda=1<br>i2c-algo-bit.o: (1) scl=1, sda=0<br>i2c-algo-bit.o
: (2) scl=1, sda=1<br>i2c-algo-bit.o: (3) scl=0, sda=1<br>i2c-algo-bit.o: (4) scl=1, sda=1<br>i2c-algo-bit.o: cx88[0] passed test.<br>cx88[0]/0: found at 0000:00:0a.0, rev: 5, irq: 5, latency: 64, mmio: 0xdd000000<br>lgdt330x: module not supported by Novell, setting U taint flag.
<br>or51132: module not supported by Novell, setting U taint flag.<br>cx2388x dvb driver version 0.0.5 loaded<br>&nbsp;: chip found @ 0xc2 (cx88[0])<br>tuner 1-0061: type set to 52 (Thomson DDT 7610 (ATSC/NTSC))<br>cx88[0]/0: registered device video0 [v4l2]
<br>cx88[0]/0: registered device vbi0<br>cx88[0]/0: registered device radio0<br>ACPI: PCI Interrupt 0000:00:0a.2[A] -&gt; Link [LNKB] -&gt; GSI 5 (level, low) -&gt; IRQ 5<br>cx88[0]/2: found at 0000:00:0a.2, rev: 5, irq: 5, latency: 64, mmio: 0xde000000
<br>cx88[0]/2: cx2388x based dvb card<br>DVB: registering new adapter (cx88[0]).<br>DVB: registering frontend 0 (pcHDTV HD3000 HDTV)...<br><br>I can acquire ASTC channels using azap and display using mplayer so I know I have a signal.
<br>
<br>When it comes to MythTV I've been steadily working through several issues (e.g. gcc3.4, joystick.h) and I have run mythtv-setup, mythfilldatabase, started mythbackend and I get the following output with error:<br>2005-12-17 00:16:
24.016 Using runtime prefix = /usr/local<br>2005-12-17 00:16:24.030 New DB connection, total: 1<br>2005-12-17 00:16:24.037 Enabling Settings Cache.<br>2005-12-17 00:16:24.037 Clearing Settings Cache.<br>2005-12-17 00:16:24.039
 Current Schema Version: 1120<br>Starting up as the master server.<br>2005-12-17 00:16:24.047 New DB connection, total: 2<br>2005-12-17 00:16:24.051 DVB#0 Using DVB card 0, with frontend 'pcHDTV HD3000 HDTV'.<br>2005-12-17 00:16:
24.053 New DB connection, total: 3<br>2005-12-17 00:16:24.054 DVB#0 ERROR - Could not find dvb tuning parameters for transport 32767<br>2005-12-17 00:16:24.055 DVB#0 ERROR - Failed to get channel options for channel 11.<br>
2005-12-17 00:16:24.065 New DB scheduler connection<br>2005-12-17 00:16:24.075 mythbackend version: 0.19.20051208-1 <a href="http://www.mythtv.org">www.mythtv.org</a><br>2005-12-17 00:16:24.075 Enabled verbose msgs:&nbsp; important general
<br>2005-12-17 00:16:24.076 AutoExpire: Found 1 recorders w/max rate of 138 MiB/min<br>2005-12-17 00:16:24.077 AutoExpire: Required Free Space: 3.0 GB w/freq: 10 min<br><br>I have seen other postings for this error but nothing that leads me to a solution.
<br>I would appreciate any suggestions on what to try next.<br><br><br>devodl