<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
I can't speak to your ATI issues but I can confirm that it is possible
to get this setup working in Gentoo as I'm watching CSI on my Gentoo
bases MythTV box now :) My setup has an Nvidia based video card which
does not allow me to use the kernel frame buffer device along with the
nvidia.ko kernel module this may be your problem too looking at the
last line of dmesg. I suspect your issue is not "Gentoo w/TV-Out" but
ATI tv-out that would be my first step, once you have X working move
onto the IVTV part. <br>
<br>
I just upgraded from a bt878 to a PVR-500 and have to say it went very
well, though you have to make sure your myth user is in the video group
otherwise you'll get permissions errors accessing the tuner on
/dev/v4l/video0. To verify that you can use the tuner at all use
something like TVTime which doesn't do all the extra stuff Myth does. <br>
<br>
Now that you can watch TV this is when you should try to make it all
play nice with Myth. Since you should now have Myth working correctly
this is when you should work on LIRC as it is the last and in terms of
a working system least important. I realize that for usability it is
the most important but a working remote and no recordings doesn't do
you much good either.<br>
<br>
Don Sheehan wrote:
<blockquote
cite="midff009ac60511191838m7d71fcc5o1e4b65fa3df02d22@mail.gmail.com"
type="cite">I cut this down to make it to the list. Thanks<br>
<br>
<div><span class="gmail_quote">On 11/19/05, <b
class="gmail_sendername">Don Sheehan</b> <<a
href="mailto:don.sheehan@gmail.com">don.sheehan@gmail.com</a>>
wrote:</span>
<blockquote class="gmail_quote"
style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">I
am having very little success setting up myth on multiple levels. Any
help is greatly appreciated. I am pulling my hair outand there was not
much to start with!<br>
<br>
At this point, after following more than a few howto's and guides, I am
ready to start over if that is the best course of action. Is there a
clean howto for gentoo with TV-out working?<br>
<br>
Thanks!<br>
<br>
<br>
Gentoo 2.6.14<br>
ATI Radeon 7000 <br>
Hauppauge 150MCE w/ remote<br>
media-tv/mythtv-0.18.1-r1<br>
media-tv/ivtv-0.4.0-r2<br>
app-misc/lirc-0.7.0-r1<br>
<br>
<br>
I could not get TV-out to work with the radeon driver but it is working
with vesa<br>
Is this a possible problem?<br>
It was in color, now it is B&W only, ugghhh<br>
<br>
I cannot get the video input to show anything but black static. The
cable (RG-6) is attached to the coax connector and I have checked that
there is signal.<br>
Which device is the right one? I get
output from /dev/v4l/video0, video24 and video32 but it is black static.<br>
I have followed the ivtv guidance to get
the firmware into /lib/modules... but no change even after a reboot.<br>
<br>
The mce remote does not work. (it is the one with gray on top) I tried
jarod's file and the one that gets created by manually when I compiled
lirc from source. <br>
The lircd log below shows it as ok after the
last reboot and it loads the firmware accorging to dmesg below.<br>
irw show nothing.<br>
<br>
<br>
Now I have lots of this in /var/log/messages and dmesg<br>
Nov 19 20:16:28 gentoo ivtv0 warning: ENC Stream 0 OVERFLOW #158240:
Stealing a Buffer, 512 currently allocated<br>
<br>
<br>
Linux version 2.6.13-gentoo-r5 (root@gentoo) (gcc version 3.3.6 (Gentoo
3.3.6, ssp-3.3.6-1.0, pie-8.7.8)) #1 SMP Sat Nov 5 08:01:36 EST 2005<br>
<snipped><br>
511MB LOWMEM available.<br>
found SMP MP-table at 000ff780<br>
On node 0 totalpages: 130864<br>
DMA zone: 4096 pages, LIFO batch:1<br>
Normal zone: 126768 pages, LIFO batch:31<br>
HighMem zone: 0 pages, LIFO batch:1<br>
DMI 2.3 present.<br>
ACPI: RSDP (v000
ACPIAM
) @ 0x000faac0<br>
<snipped><br>
vesafb: ATI Technologies Inc., R100, 01.00 (OEM: ATI RADEON VE)<br>
vesafb: VBE version: 2.0<br>
vesafb: protected mode interface info at c000:5478<br>
vesafb: pmi: set display start = c00c550c, set palette = c00c5558<br>
vesafb: pmi: ports = a010 a016 a054 a038 a03c a05c a000 a004 a0b0 a0b2
a0b4<br>
vesafb: monitor limits: vf = 0 Hz, hf = 0 kHz, clk = 0 MHz<br>
vesafb: scrolling: redraw<br>
Console: switching to colour frame buffer device 80x30<br>
vesafb: framebuffer at 0xe0000000, mapped to 0xe0880000, using 10240k,
total 65536k<br>
fb0: VESA VGA frame buffer device<br>
<snipped><br>
Linux video capture interface: v1.00<br>
ivtv: ==================== START INIT IVTV ====================<br>
ivtv: version 0.4.0 (tagged release) loading<br>
ivtv: Linux version: 2.6.13-gentoo-r5 SMP preempt 586 4KSTACKS gcc-3.3<br>
ivtv: In case of problems please include the debug info<br>
ivtv: between the START INIT IVTV and END INIT IVTV lines when<br>
ivtv: mailing the ivtv-devel mailinglist.<br>
ivtv0: Autodetected WinTV PVR 150 card (iTVC16 based)<br>
ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 18 (level, low) -> IRQ
17<br>
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]<br>
tveeprom: Hauppauge: model = 26582, rev = C299, serial# = 8441914<br>
tveeprom: tuner = <unknown> (idx = 99, type = -1069535552)<br>
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)<br>
tveeprom: audio_processor = MSP3410D (type = 5)<br>
: chip found @ 0xc2 (ivtv i2c driver #0)<br>
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]<br>
cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)<br>
cx25840 0-0044: loaded /lib/modules/HcwMakoA.ROM firmware (14264 bytes)<br>
ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]<br>
wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)<br>
ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]<br>
ivtv0: loading /lib/modules/ivtv-fw-enc.bin<br>
ivtv0: Encoder revision: 0x02050032<br>
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
total)<br>
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB
total)<br>
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB
total)<br>
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers
(2048KB total)<br>
ivtv0: Create encoder radio stream<br>
tuner 0-0061: tuner type not set<br>
tuner 0-0061: tuner type not set<br>
ivtv0: Initialized WinTV PVR 150, card #0<br>
ivtv: ==================== END INIT IVTV ====================<br>
<snipped><br>
usb 2-2: new full speed USB device using uhci_hcd and address 2<br>
usb 2-2: ep0 maxpacket = 16<br>
usb 2-2: default language 0x0409<br>
usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=3<br>
usb 2-2: Product: eHome Infrared Transceiver<br>
usb 2-2: Manufacturer: SMK<br>
usb 2-2: SerialNumber: SM003w0J<br>
usb 2-2: hotplug<br>
usb 2-2: adding 2-2:1.0 (config #1, interface 0)<br>
usb 2-2:1.0: hotplug<br>
<snipped><br>
usb 2-2: new full speed USB device using uhci_hcd and address 3<br>
usb 2-2: ep0 maxpacket = 16<br>
usb 2-2: default language 0x0409<br>
usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=3<br>
usb 2-2: Product: eHome Infrared Transceiver<br>
usb 2-2: Manufacturer: SMK<br>
usb 2-2: SerialNumber: SM003w0J<br>
usb 2-2: hotplug<br>
usb 2-2: adding 2-2:1.0 (config #1, interface 0)<br>
usb 2-2:1.0: hotplug<br>
<snipped><br>
ALSA sound/pci/via82xx.c:580: codec_read: codec 0 is not valid
[0xfe0000]<br>
ALSA sound/pci/via82xx.c:580: codec_read: codec 0 is not valid
[0xfe0000]<br>
ALSA sound/pci/via82xx.c:580: codec_read: codec 0 is not valid
[0xfe0000]<br>
ALSA sound/pci/via82xx.c:580: codec_read: codec 0 is not valid
[0xfe0000]<br>
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ
21<br>
radeonfb: cannot reserve FB region<br>
<snipped></blockquote>
<br>
<blockquote class="gmail_quote"
style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">gentoo
~ # more /var/log/lircd
<br>
Nov 18 20:31:15 gentoo lircd 0.7.1: lircd(mceusb) ready<br>
Nov 18 20:31:22 gentoo lircd 0.7.1: accepted new client on /dev/lircd<br>
Nov 18 20:31:22 gentoo lircd 0.7.1: could not get file information for
/dev/lirc0<br>
Nov 18 20:31:22 gentoo lircd 0.7.1: default_init(): No such file or
directory<br>
Nov 18 20:31:22 gentoo lircd 0.7.1: caught signal<br>
Nov 18 18:53:15 gentoo lircd 0.7.1: lircd(mceusb) ready<br>
Nov 19 18:56:22 gentoo lircd 0.7.1: accepted new client on /dev/lircd<br>
Nov 19 18:56:22 gentoo lircd 0.7.1: could not get file information for
/dev/lirc0<br>
Nov 19 18:56:22 gentoo lircd 0.7.1: default_init(): No such file or
directory<br>
Nov 19 18:56:22 gentoo lircd 0.7.1: caught signal<br>
Nov 18 20:34:09 gentoo lircd 0.7.1: lircd(mceusb) ready<br>
gentoo ~ # irw<br>
gentoo ~ #<br>
<br>
mythfrontend starup messages<br>
Total desktop width=640, height=480, numscreens=1<br>
2005-11-19 21:03:27.058 Using screen 0, 640x480 at 0,0<br>
2005-11-19 21:03:27.061 mythfrontend version: 0.18.1.20050510-1 <a
href="http://www.mythtv.org" target="_blank"
onclick="return top.js.OpenExtLink(window,event,this)">www.mythtv.org</a><br>
2005-11-19 21:03:27.061 Enabled verbose msgs : important general<br>
2005-11-19 21:03:27.572 Switching to square mode (blue)<br>
mythtv: could not connect to socket<br>
mythtv: Connection refused<br>
lirc_init failed for mythtv, see preceding messages<br>
2005-11-19 21:03:27.846 Joystick disabled.<br>
2005-11-19 21:03:27.915 Registering Internal as a media playback plugin.<br>
2005-11-19 21:03:28.210 Registering MythDVD DVD Media Handler as a
media handler<br>
2005-11-19 21:03:28.211 Registering MythDVD VCD Media Handler as a
media handler<br>
2005-11-19 21:03:28.980 Registering MythMusic Media Handler as a media
handler<br>
<br>
mythtv@gentoo ~ $ lsmod<br>
Module Size Used by<br>
ipv6 250528 18<br>
snd_pcm_oss 59392 0<br>
snd_mixer_oss 19584 1 snd_pcm_oss<br>
snd_seq_dummy 3684 0<br>
snd_seq_oss 34368 0<br>
snd_seq_midi_event 7008 1 snd_seq_oss<br>
snd_seq
57040 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event<br>
ohci_hcd 34916 0<br>
parport_pc 39716 0<br>
parport 35880 1 parport_pc<br>
floppy 59316 0<br>
pcspkr 3616 0<br>
rtc
9172 0<br>
radeonfb 22804 0<br>
snd_via82xx 28800 0<br>
gameport 16264 1 snd_via82xx<br>
snd_ac97_codec 79292 1 snd_via82xx<br>
snd_pcm
97764 3 snd_pcm_oss,snd_via82xx,snd_ac97_codec<br>
snd_timer 26660 2 snd_seq,snd_pcm<br>
snd_page_alloc 10856 2 snd_via82xx,snd_pcm<br>
snd_mpu401_uart 8096 1 snd_via82xx<br>
snd_rawmidi 26720 1 snd_mpu401_uart<br>
snd_seq_device 8652 4
snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi<br>
snd
63524 13
snd_pcm_oss,snd_mixer_oss,snd_seq_dummy,snd_seq_oss,snd_seq_midi_event,snd_seq,snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device<br>
i2c_viapro 8176 0<br>
ehci_hcd 47080 0<br>
uhci_hcd 34348 0<br>
sata_via 8516 0<br>
tda9887 13264 0<br>
wm8775 6204 0<br>
cx25840 39732 0<br>
firmware_class 10368 1 cx25840<br>
tuner 35976 0<br>
tveeprom 11792 0<br>
ivtv 210836 0<br>
i2c_algo_bit 9480 1 ivtv<br>
i2c_core
21696 7
i2c_viapro,tda9887,wm8775,cx25840,tuner,tveeprom,i2c_algo_bit<br>
videodev 9888 1 ivtv<br>
sk98lin 164448 0<br>
sata_promise 11012 0<br>
libata
46532 2 sata_via,sata_promise<br>
amd64_agp 12232 1<br>
agpgart 35280 1 amd64_agp<br>
usbcore
133308 4 ohci_hcd,ehci_hcd,uhci_hcd<br>
dm_mod 58076 0<br>
</blockquote>
</div>
<pre wrap="">
<hr size="4" width="90%">
_______________________________________________
mythtv-users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:mythtv-users@mythtv.org">mythtv-users@mythtv.org</a>
<a class="moz-txt-link-freetext" href="http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users">http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users</a>
</pre>
</blockquote>
</body>
</html>