<div><span class="gmail_quote">On 11/3/05, <b class="gmail_sendername">Robert Johnston</b> <<a href="mailto:anaerin@gmail.com">anaerin@gmail.com</a>> wrote:<br>
<br>
</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">Tried seeing what irw reports as you press keys on the remote?<br></blockquote></div>
<br>
I have now tried the command "irw", it reports absolutely nothing
during those times when the following line is in effect (in
/etc/modprobe.conf):<br>
<br>
options lirc_atiusb unique=1 debug=1 mask=0x0002<br>
<br>
I also tried mask=0x00FF - same results, still no "irw" output.<br>
<br>
I have also noticed that the codes received, as noted in the system log,<br>
do not match the codes in /etc/lircd.conf. The codes are close,
differing in only one byte-position ( I checked only a few keys: 2 3 4
5).<br>
<br>
Does this mean I have to run the "irrecord" command again, and then ADD
the codes generated during that run to the codes already in
/etc/lircd.conf ?<br>
Or, REPLACE the existing /etc/lircd.conf with the newly-generated set of codes from re-running irrecord ?<br>
<br>
If re-running "irrecord" is required every time the unit code ID is
changed, my comment would be that changing IDs is not something I would
want to do every day, or every week, or even every month!<br>
<br>
-- <br>
MM<br>
<br>