<div>Hmmm.... actually I just saw some output after exiting mythtvsetup that probably is the problem.</div>
<div> </div>
<div>Couldn't open /dev/video0 to probe its inputs.<br>Couldn't open /dev/video1 to probe its inputs.</div>
<div> </div>
<div>I assumed this is a another permissions issue so I tried running mythtvsetup as root. Sure enough, I could setup the card as expected. What is the command or file I need to edit to give permission to the mythtv user to use the videoX devices? The official docs reference instructions for Mandrake, but I am on FC4.
</div>
<div><br>Thanks!</div>
<div><br><br> </div>
<div><span class="gmail_quote">On 10/14/05, <b class="gmail_sendername">ToadMazter</b> <<a href="mailto:toadmazter@gmail.com">toadmazter@gmail.com</a>> wrote:</span>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">
<div>Thanks for all the replies and help. I'm still having a problem it seems with the PVR 500. I was able to install th ivtv 0.4.x drivers, and had to replace the tveeprom-ivtv.ko file with the tveeprom from the kernel in order for the HD-3000 to work again. I also then had to edit
modules.pcimap and make the cx88_dvb line come before the cx_88_blackbird line so that the DVB driver would load at startup.</div>
<div> </div>
<div>Now when I attempt to setup my capture cards in mythtvsetup, for the PVR-500 I select "MPEG-2" as the card type and "/dev/video0" for the device, but I am not offered a choice in the defult input list, it is just blank. I was expecting to see "tuner0". If I save the card and go back in, it lists the input as "Television", but I can't assign a Video Source to it. How should I troubleshoot this?
</div>
<div> </div>
<div>ivtv: ==================== START INIT IVTV ====================<br>ivtv: version 0.4.0 (tagged release) loading<br>ivtv: Linux version: 2.6.13-1.1526_FC4smp SMP 686 REGPARM 4KSTACKS gcc-4.0<br>ivtv: In case of problems please include the debug info
<br>ivtv: between the START INIT IVTV and END INIT IVTV lines when<br>ivtv: mailing the ivtv-devel mailinglist.<br>ivtv0: Autodetected WinTV PVR 150 card (iTVC16 based)<br>ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 19 (level, low) -> IRQ 177
<br>ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]<br>tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 8428663<br>tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57)<br>tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
<br>tveeprom: audio_processor = MSP3410D (type = 5)<br>ivtv0: This is the first unit of a PVR500<br>tuner (ivtv): chip found at addr 0xc0 i2c-bus ivtv i2c driver #0<br>TEA5767 detected.<br>ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=60]
<br>tuner: type set to 62 (Philips TEA5767HN FM Radio) by autodetect<br>type set to 62 (Philips TEA5767HN FM Radio)<br>tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0<br>ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
<br>cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)<br>cx25840 1-0044: loaded /lib/modules/HcwMakoA.ROM firmware (14264 bytes)<br>ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]<br>wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
<br>ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]<br>tda9885/6/7: chip found @ 0x86<br>ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]<br>ivtv0: Detected a TEA5767 radio tuner. Enabling radio support.
<br>ivtv0: loading /lib/modules/ivtv-fw-enc.bin<br>ivtv0: Encoder revision: 0x02050032<br>ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)<br>ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
<br>ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)<br>ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)<br>ivtv0: Create encoder radio stream<br>tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #0
<br>ivtv0: Initialized WinTV PVR 500 (unit #1), card #0<br>ivtv: ====================== NEXT CARD ======================<br>ivtv1: Autodetected WinTV PVR 150 card (iTVC16 based)<br>ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 16 (level, low) -> IRQ 201
<br>ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50]<br>tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #1<br>ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=61]<br>cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
<br>cx25840 2-0044: loaded /lib/modules/HcwMakoA.ROM firmware (14264 bytes)<br>ivtv1: i2c attach to card #1 ok [client=cx25840, addr=44]<br>wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1)<br>ivtv1: i2c attach to card #1 ok [client=wm8775, addr=1b]
<br>tda9885/6/7: chip found @ 0x86<br>ivtv1: i2c attach to card #1 ok [client=tda9887, addr=43]<br>tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 8428663<br>tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57)
<br>tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)<br>tveeprom: audio_processor = MSP3410D (type = 5)<br>ivtv1: This is the second unit of a PVR500<br>ivtv1: Correcting tveeprom data: no radio present on second unit
<br>ivtv1: loading /lib/modules/ivtv-fw-enc.bin<br>ivtv1: Encoder revision: 0x02050032<br>ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)<br>ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
<br>ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)<br>ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)<br>tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #1
<br>ivtv1: Initialized WinTV PVR 500 (unit #2), card #1<br>ivtv: ==================== END INIT IVTV ====================<br> </div>
<div> </div>
<div>Thanks for the help!</div>
<div> </div></blockquote></div><br>