hi.<br>
<br>
I did a yum -y update of my system and now I lost /dev/video0. I cannot record, i cannot watch live tv.<br>
<br>
I have a PVR250 and it was working fine.<br>
<br>
Here is my IVTV content<br>
ivtv: ==================== START INIT IVTV ====================<br>
ivtv: version 0.3.8 (tagged release) loading<br>
ivtv: Linux version: 2.6.12-1.1398_FC4 686 REGPARM 4KSTACKS gcc-4.0<br>
ivtv: In case of problems please include the debug info<br>
ivtv: between the START INIT IVTV and END INIT IVTV lines when<br>
ivtv: mailing the ivtv-devel mailinglist.<br>
ivtv: Autodetected WinTV PVR 250 card (iTVC16 based)<br>
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 9<br>
PCI: setting IRQ 9 as level-triggered<br>
ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [LNK1] -> GSI 9 (level, low) -> IRQ 9<br>
ivtv: Unreasonably low latency timer, setting to 64 (was 32)<br>
tveeprom: Hauppauge: model = 32062, rev = C182, serial# = 7913909<br>
tveeprom: tuner = LG TAPC H791F (idx = 82, type = 39)<br>
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)<br>
tveeprom: audio processor = MSP3445 (type = c)<br>
tveeprom: decoder processor = SAA7115 (type = 13)<br>
ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50]<br>
ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61]<br>
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)<br>
ivtv: i2c attach to card #0 ok [client=saa7115[50], addr=21]<br>
msp34xx: ivtv version<br>
msp34xx: init: chip=MSP3445G-B8, has NICAM support, simple (D) mode, simpler (G) no-thread mode<br>
msp34xx: $Id$ compiled on: Sep 12 2005 19:13:59<br>
ivtv: i2c attach to card #0 ok [client=MSP3445G-B8, addr=40]<br>
ivtv: loading /lib/modules/ivtv-fw-enc.bin<br>
ivtv: Encoder revision: 0x02040024<br>
ivtv warning: Encoder Firmware can be buggy, use version 0x02040011!!!!<br>
ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)<br>
ivtv: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)<br>
ivtv: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)<br>
ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)<br>
tuner 0-0061: type set to 39 (LG NTSC (newer TAPC series))<br>
ivtv: Initialized WinTV PVR 250, card #0<br>
ivtv: ==================== END INIT IVTV ====================<br>
<br>
Also, after trying to watch /dev/video0 using mplayer, I get at the end of dmesg the following:<br>
<br>
ivtv warning: ENC: REG_DMAXFER 2 wait failed<br>
ivtv warning: DEC: REG_ENCSG1LEN wait failed<br>
ivtv warning: ENC: DMA still Pending while stopping capture!<br>
<br>
How can I troubleshoot and solve this? I do not want to reinstall from 0<br>
<br>
thanks!<br>
<br clear="all"><br>-- <br>------------------------------<br> /\_/\ <br> |O O| <a href="mailto:pepebuho@pananet.com">pepebuho@pananet.com</a><br> ~~~~ Javier Perez<br> ~~~~ While the night runs<br> ~~~~ toward the day...
<br> m m Pepebuho watches <br> from his high perch.