<div>I think you got it there... I think I have Tuner1 set for /dev/video1. So I have should have 2 Tuner 0's and each should be /dev/tuner0 and /dev/tuner1. I think thats what you're trying to say. I'm not sure how to see if IVTV is getting both cards but I think "dmesg | grep IVTV" should do it and I see:
</div>
<div> </div>
<div>ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)<br> : chip found @ 0xc0 (ivtv i2c driver #0)<br>ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=60]<br> : chip found @ 0xc2 (ivtv i2c driver #0)<br>ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61]
<br>ivtv: i2c attach to card #0 ok [client=tda9887, addr=43]<br>ivtv: i2c attach to card #0 ok [client=tveeprom, addr=50]<br>ivtv: This is the first unit of a PVR500<br>So there's the first card.</div>
<div> </div>
<div>ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)<br> : chip found @ 0xc2 (ivtv i2c driver #1)<br>ivtv: i2c attach to card #1 ok [client=(tuner unset), addr=61]<br>ivtv: i2c attach to card #1 ok [client=tda9887, addr=43]
<br>ivtv: i2c attach to card #1 ok [client=tveeprom, addr=50]<br>ivtv: i2c attach to card #1 ok [client=cx25840[50], addr=44]<br>ivtv: i2c attach to card #1 ok [client=wm8775[50], addr=1b]<br>ivtv: This is the second unit of a PVR500
<br>And here's tuner 2 (although its the same card.)<br><br> </div>
<div>I just have one more question. Even though there is only one coaxial cable coming into the card because theres only 1 cable input, I still can have 2 streams there, right? Or do I somehow need another cable input?</div>
<div> </div>
<div><span class="gmail_quote">On 9/8/05, <b class="gmail_sendername">Joe Votour</b> <<a href="mailto:joevph@yahoo.com">joevph@yahoo.com</a>> wrote:</span>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Check that the ivtv driver detects your PVR-500 as two<br>PVR-150s. Check that you can get data from both
<br>tuners by doing a "cat /dev/videoX > test.mpg", where<br>X is first 0, and then 1. If not, then it's an ivtv<br>problem.<br><br>Also, check that in the MythTV setup that you used<br>"Tuner 0" for both /dev/video0 and /dev/video1.
<br>Despite the fact there is a "Tuner 1" entry, it isn't<br>used with a PVR-500 (because the PVR-500 is seen by<br>the ivtv driver as two PVR-150s).<br><br>Can't help you with the LiveTV issue. I rarely get<br>
pauses when using it, and when I do, they're once per<br>half hour, or even once per hour.<br><br>-- Joe<br><br>--- Steve <<a href="mailto:stgarf@gmail.com">stgarf@gmail.com</a>> wrote:<br><br>> Hey guys,<br>> I have the WinTV-PVR-500 from Hauppauge. It's
<br>> supposed to be a dual tuner<br>> card, and AFAIK Myth is only seeing one tuner. I<br>> press 'C' because that's<br>> supposed to change inputs, and it does. But only<br>> when I'm not recording<br>> anything. If I am recording Myth complains that all
<br>> available inputs are in<br>> use.<br>> Another problem I have is my LiveTV playback<br>> pauses for about a tenth of a<br>> second, EVERY second. It's really quite annoying and<br>> I've messed with quite
<br>> a few settings and still can't seem to fix it. Any<br>> help is appreciated.<br>> - Thanks in advance,<br>> Steve<br>> > _______________________________________________<br>> mythtv-users mailing list
<br>> <a href="mailto:mythtv-users@mythtv.org">mythtv-users@mythtv.org</a><br>><br><a href="http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users">http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users</a><br>>
<br><br><br><br><br><br>______________________________________________________<br>Click here to donate to the Hurricane Katrina relief effort.<br><a href="http://store.yahoo.com/redcross-donate3/">http://store.yahoo.com/redcross-donate3/
</a><br></blockquote></div><br>