<div>I have read, and read, and read so many FAQ's, suggested resolutions, etc. and still am having sound problems. I am sure it is due to my relatively short history with Linux / Knoppix / MythTV. Here is a portion of the dmesg output -- any suggestions on how to get the audio setup will be appreciated.
</div>
<div> </div>
<div>input: PC Speaker<br>bttv: driver version 0.9.15 loaded<br>bttv: using 8 buffers with 2080k (520 pages) each for capture<br>bttv: Host bridge needs ETBF enabled.<br>bttv: Bt8xx card found (0).<br>bttv0: Bt878 (rev 2) at 0000:00:
04.0, irq: 11, latency: 66, mmio: 0x44080000<br>bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb<br>bttv0: using: Hauppauge (bt878) [card=10,autodetected]<br>bttv0: enabling ETBF (430FX/VP3 compatibilty)
<br>bttv0: gpio: en=00000000, out=00000000 in=00fffffb [init]<br>bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]<br>tveeprom: Hauppauge: model = 61201, rev = B226, serial# = 3248989<br>tveeprom: tuner = Temic 4036FY5 (idx = 26, type = 8)
<br>tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)<br>tveeprom: audio_processor = None (type = 0)<br>bttv0: using tuner=8<br>bttv0: i2c: checking for MSP34xx @ 0x80... not found<br>bttv0: i2c: checking for TDA9875 @ 0xb0... not found
<br>bttv0: i2c: checking for TDA7432 @ 0x8a... not found<br>tvaudio: TV audio decoder + audio/video mux driver<br>tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea632<br>0,tea6420,tda8425,pic16c54 (PV951),ta8874z
<br>bttv0: i2c: checking for TDA9887 @ 0x86... not found<br>tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw])<br>tuner 0-0061: type set to 8 (Temic NTSC (4036 FY5))<br>bttv0: registered device video0<br>bttv0: registered device vbi0
<br>bttv0: PLL: 28636363 => 35468950 .. ok<br><a href="mailto:root@mythtv">root@mythtv</a>:~#<br> </div>