<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
Jim Reith wrote:
<blockquote cite="mida06210214bf1c243122b7@%5B192.168.0.199%5D"
type="cite">
<blockquote type="cite">Hi,
<br>
<br>
I'm trying to setup a box using Knoppmyth and a PVR350 card.
<br>
<br>
I get picture but just static.
<br>
<br>
I've tryied the following while having LiveTV running, run ivtvctl -R,
<br>
and run scantv in parallell.
<br>
<br>
When I just run ivtvctl -R it responds with saying that frequency is
set
<br>
to 0 even though I've hard coded the channel number for two channels in
<br>
mythtv-setup. I stays at 0 whatever channel i switch to.
<br>
<br>
So I let it run while letting scantv perform a full scan. When I do
this
<br>
I get variations in the static and sometimes I even get something that
<br>
could become a picture with some luck :-).
<br>
<br>
I've also tried to run mplayer /dev/video0 while performing a scan with
<br>
scantv with almost the same result. The static shows up a bit
<br>
differently but it almost becomes a picture at the same frequencies.
<br>
<br>
So I guess that I have got two issues. One, no clear picture, there
<br>
should be one since I get picture on a regular TV using the same
antenna
<br>
cable. Two, MythTV keeps setting my card to frequency 0 whenever I
<br>
change channel. It does at least set my card to input from Tuner 0, I
<br>
can see that when I run ivtvctl -P.
<br>
<br>
Anyone? Please! :-)
<br>
</blockquote>
<br>
What is your output device?
<br>
Do you have an input source set up?
<br>
Have you run mythfilldatabase or edited the frequency into the DB?
<br>
<br>
Also, what distro and what software versions?
<br>
<br>
<pre wrap="">
<hr size="4" width="90%">
_______________________________________________
mythtv-users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:mythtv-users@mythtv.org">mythtv-users@mythtv.org</a>
<a class="moz-txt-link-freetext" href="http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users">http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users</a>
</pre>
</blockquote>
For the moment I use my regular monitor as output device, ATI Radeon
9600. I get exactly the same picture when I hook it up to a DLP
projector via the ATI card. Haven't tried to connect via the PVR350
card yet.<br>
<br>
ivtv 0.2.0<br>
Myth 0.18.1<br>
Knoppmyth Release 5A16, the above is the ones included in this release.<br>
<br>
I did set everything up the first time in mythtv-setup, after that did
I run mythfilldatabase, getting channels for Sweden, then I changed the
values for two channels since I have cable TV here and I know that the
channels aren't at the same frequencies. I ran
/etc/cron.daily/myth-backend after I did those changes in myhttv-setup.<br>
<br>
I haven't had any peak in the database yet. Is there something
interesting to be found in there or might it be easyier to make the
changes directly in the database? I am very familiar with SQL so it
wouldn't be a problem if you think that it is easyier.<br>
<br>
Thank you!!<br>
<br>
/Peter<br>
</body>
</html>