<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/3.0.10">
</HEAD>
<BODY>
<FONT SIZE="2"><BR>
>When you view the details of a particular channel in mythsetup, there should <BR>
>be a checkbox that says something like 'use on-air guide'. Just make sure <BR>
>that it's enabled - you also need to make sure that the setting for 'use dvb <BR>
>card on demand' is set to off - i.e. the backend always has access to the <BR>
>dvb card. <BR>
<BR>
>You might have to restart the backend now. Then it's just a case of waiting <BR>
>- within five mins or so, you're guide data will just magically appear. No <BR>
>need to run mythfilldatabase etc - so take it out of the mythfrontend <BR>
>configuration or any cronjobs that you might have setup.<BR>
<BR>
Correct me if I'm wrong.. But disenabling 'use dvb card on demand' causes the dvb card(s) to run hot all the time, and that is not good for a quiet, long lasting system. At least this was the case down 0.15.</FONT><BR>
<TABLE CELLSPACING="0" CELLPADDING="0" WIDTH="100%">
<TR>
<TD>
<UL>
<LI><FONT COLOR="#3366ff">Sami Röppänen</FONT>
</UL>
</TD>
</TR>
</TABLE>
</BODY>
</HTML>