# Xorg configuration created by system-config-display

Section "ServerLayout"
       Identifier     "single head configuration"
# choose your screen here
#        Screen      0  "Screen0" 0 0
       Screen      0  "TV Screen"
#       Screen      1  "TV Screen" RightOf "Screen0"  # << (TV screen)
       InputDevice    "Mouse0" "CorePointer"
       InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name of
the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
       RgbPath      "/usr/X11R6/lib/X11/rgb"
       FontPath     "unix/:7100"
EndSection

Section "Module"
       Load  "dbe"
       Load  "extmod"
# comment te next line out if using PVR350 TV out
#       Load  "fbdevhw"
       Load  "glx"
       Load  "record"
       Load  "freetype"
       Load  "type1"
       Load  "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#       Option  "Xleds"         "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#       Option  "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#       Option  "XkbModel"      "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#       Option  "XkbModel"      "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#       Option  "XkbLayout"     "de"
# or:
#       Option  "XkbLayout"     "de"
#       Option  "XkbVariant"    "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#       Option  "XkbOptions"    "ctrl:swapcaps"
# Or if you just want both to be control, use:
#       Option  "XkbOptions"    "ctrl:nocaps"
#
       Identifier  "Keyboard0"
       Driver      "kbd"
       Option      "XkbModel" "pc105"
       Option      "XkbLayout" "us"
EndSection

Section "InputDevice"
       Identifier  "Mouse0"
       Driver      "mouse"
       Option      "Protocol" "IMPS/2"
       Option      "Device" "/dev/input/mice"
       Option      "ZAxisMapping" "4 5"
       Option      "Emulate3Buttons" "no"
EndSection

Section "Monitor"
       Identifier   "Monitor0"
       VendorName   "Monitor Vendor"
       ModelName    "Compaq Presario MV700 Color Monitor"
       HorizSync    30.0 - 70.0
       VertRefresh  50.0 - 100.0
       Option      "dpms"
EndSection

Section "Device"
       Identifier  "Videocard0"
       Driver      "radeon"
       VendorName  "Videocard vendor"
       BoardName   "ATI Radeon 9100"
EndSection

Section "Screen"
       Identifier "Screen0"
       Device     "Videocard0"
       Monitor    "Monitor0"
       DefaultDepth     24
       SubSection "Display"
               Viewport   0 0
               Depth     24
               Modes    "1024x768" "800x600" "640x480"
       EndSubSection
EndSection

Section "DRI"
       Group        0
       Mode         0666
EndSection

Section "Monitor"
   Identifier  "PAL Monitor"
   HorizSync  30-68
   VertRefresh 50-120
   Mode "720x576" #Obtained from fbset -fb /dev/fb1 -x
   # D: 41.475 MHz, H: 44.693 kHz, V: 74.488 Hz
      DotClock 41.476
      HTimings 720 752 840 928
      VTimings 576 580 584 600
      Flags    "-HSync" "-VSync"
   EndMode
EndSection

Section "Device"
   Identifier  "Hauppauge PVR 350 iTVC15 Framebuffer"
   Driver      "ivtvdev"
   Option      "fbdev" "/dev/fb1" # <-- The fb from dmesg, most likely the
same
# Output from lspci is: 02:09.0
# Output from /usr/X11R6/bin/Xorg -scanpci:
# (2:9:0) unknown card (0x0070/0x4000) using a Internext Compression Inc
iTVC15 MPEG-2 Encoder
   BusID "2:9:0"              # <-- obtained from lspci, as hex
EndSection

Section "Screen"
 Identifier  "TV Screen"
 Device      "Hauppauge PVR 350 iTVC15 Framebuffer"
 Monitor     "PAL Monitor"
 DefaultDepth 24
 DefaultFbbpp 32
 Subsection "Display"
   Depth 24
   FbBpp 32
   Modes "720x576"
 EndSubsection
EndSection