<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1476" name=GENERATOR></HEAD>
<BODY style="MARGIN: 4px 4px 1px; FONT: 10pt MS Shell Dlg">
<DIV>Linux newbieish here - Ive had to work with redhat just enough to get a few linux-only things going, so I can just klutz my way around. </DIV>
<DIV> </DIV>
<DIV>I have a machine Im testing out knoppmyth on, and so far so good. Everything works but live tv/recording. I have a cheapie Pixelview card I picked up, and Im only able to get "snow" on the top 1/8th of the screen, which fades quickly to solid green for the bottom 7/8th. </DIV>
<DIV> </DIV>
<DIV>I've read the list and searched all I can find, and I believe Im not getting the correct tuner type set. Im not sure where/how to change this in Knoppmyth tho, as it seems different than other distros. I'm also not sure how to tell what modules I have loaded and/or need to load for this to work correctly.</DIV>
<DIV> </DIV>
<DIV>Here's the output from lsmod:</DIV>
<DIV> </DIV>
<DIV>Module Size Used by Not tainted<BR>snd-pcm-oss 36420 0 (autoclean)<BR>lirc_i2c 4448 0 (autoclean) (unused)<BR>lirc_dev 8592 0 (autoclean) [lirc_i2c]<BR>i830 62204 2 <BR>agpgart 42852 11 (autoclean)<BR>apm 9544 1 (autoclean)<BR>autofs4 9332 0 (unused)<BR>af_packet 14632 0 (unused)<BR>snd-mixer-oss 11640 0 [snd-pcm-oss]<BR>snd-intel8x0 17636 0 <BR>snd-pcm 56000 0 [snd-pcm-oss snd-intel8x0]<BR>snd-timer 14088 0 [snd-pcm]<BR>snd-ac97-codec 32832 0 [snd-intel8x0]<BR>snd-page-alloc 4316 0 [snd-intel8x0 snd-pcm]<BR>snd-mpu401-uart &
nbsp; 3168 0 [snd-intel8x0]<BR>snd-rawmidi 13088 0 [snd-mpu401-uart]<BR>snd-seq-device 3824 0 [snd-rawmidi]<BR>snd 27940 0 [snd-pcm-oss snd-mixer-oss snd-intel8x0 snd-pcm snd-timer snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-device]<BR>e1000 63172 1 <BR>tuner 12712 1 <BR>bttv 110572 0 <BR>video-buf 11392 0 [bttv]<BR>btcx-risc 2216 0 [bttv]<BR>i2c-algo-bit 7048 1 [bttv]<BR>i2c-core 12452 0 [lirc_i2c tuner bttv i2c-algo-bit]<BR>soundcore 3524 3 [snd bttv]<BR>videodev 6016 2 [bttv]<BR>v4l2-common 3104 0 [bttv]<BR>serial 44708 0 <BR>usb-uhci &nb
sp; 22960 0 (unused)<BR>usbcore 59980 0 [usb-uhci]<BR>rtc 7432 0 <BR>ext3 65604 2 <BR>jbd 47952 2 [ext3]<BR></DIV>
<DIV> </DIV>
<DIV>and a look at the relevant section of dmesg:</DIV>
<DIV> </DIV>
<DIV><BR>Linux video capture interface: v1.00<BR>i2c-core.o: i2c core module version 2.6.1 (20010830)<BR>i2c-algo-bit.o: i2c bit algorithm module<BR>bttv: driver version 0.9.15 loaded<BR>bttv: using 8 buffers with 2080k (520 pages) each for capture<BR>bttv: Bt8xx card found (0).<BR>PCI: Found IRQ 9 for device 01:07.0<BR>PCI: Sharing IRQ 9 with 00:02.0<BR>PCI: Sharing IRQ 9 with 00:1d.0<BR>PCI: Sharing IRQ 9 with 01:07.1<BR>bttv0: Bt878 (rev 17) at 01:07.0, irq: 9, latency: 64, mmio: 0xf80ff000<BR>bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]<BR>bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]<BR>i2c-core.o: adapter bt878 #0 [sw] registered as adapter 0.<BR>bttv: readee error<BR>bttv0: using tuner=-1<BR>bttv0: i2c: checking for MSP34xx @ 0x80... not found<BR>bttv0: i2c: checking for TDA9875 @ 0xb0... not found<BR>bttv0: i2c: checking for TDA7432 @ 0x8a... not found<BR>bttv0: registered device video0<BR>bttv0: registered device vbi0<BR>i2c-core.o: driver i2c TV tuner driver registered.<BR>tuner: chip found at addr 0xc2 i2c-bus bt878 #0 [sw]<BR>i2c-core.o: client [(tuner unset)] registered to adapter [bt878 #0 [sw]](pos. 0).</DIV>
<DIV> </DIV>
<DIV>Any help at all is appreciated, Im SOooooo close, and REALLY want to get this working. </DIV>
<DIV> </DIV>
<DIV>Thanks in advance-</DIV>
<DIV>Jeff</DIV>
<DIV> </DIV>
<DIV>Jeffrey Brinkerhoff, Systems Analyst<BR>Syracuse University, Information Systems Department<BR>V: 315-443-5941 F:315-443-2376</DIV></BODY></HTML>