<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
<br>
<br>
Wayne Steenburg wrote:
<blockquote cite="mid1098027382.3099.6.camel@FC2" type="cite">
<pre wrap="">On Sun, 2004-10-17 at 11:03, David Phillips wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Good Mornig All,
My Setup is as follows. I have a 1.8 processor. 256
Meg of ram, WinTV GO Tuner capture card with the Black
remote. Using Mythtv 0.16 and FC2. All is working well
except the remote in Mythtv. I can see the output when
I open a terminal and input "IRW" The remote is
working fine in that area. I placed the approiate
lircrc file in the mythtv/home directory.
Question one is do I need another file in the
Mythtv/home directory for it to work?
Question two is do I need to do anything to the lircrc
file for it to work in Mythtv if it is the standard
remote.
I want to use another remote, but at this time I just
want it to work with the Hauppauge remote until I feel
comfortable messing with the lircrc file. I have been
working on this for sometime now and I have baby
steped through the problems I have had. I feel I am
very close right now.
Thanks in Advance.
</pre>
</blockquote>
<pre wrap=""><!---->Hi David, since running irw gives you output when you use the remote
that tells me that you have a /etc/lircd.conf in place. The lircrc file
belongs in /home/mythtv/.mythtv . If you just have it in your home
directory I don't believe myth will find it. If lircrc is in it's
proper place, then make sure the button names are exactly the same in
both files. I hope this gives you a good start, otherwise post again
with more info.
Wayne Steenburg
</pre>
</blockquote>
Hi Wayne,<br>
<br>
What do you mean " If lircrc is in it's proper place, then make sure
the button names are exactly the same in both files. " What 2 files?<br>
<br>
I have the same problem and I still can't get the grey Haup.
controller to work inside mythtv. I log on as user: mythtv and I have a
directory named: "/home/mythtv/.mythtv" and inside that directory are 3
files (all the same content: from Jarod's site "MythTV native LIRC
config file for the grey Hauppauge remote. By Jarod Wilson, 2003/12/21)
named: lircrc, .lircrc, .mythtv. (I created 3 files cause I found
discrepency in docs)<br>
<br>
But, I still have no luck getting the controller to work inside mythtv.<br>
<br>
Any help would be appreciated<br>
</body>
</html>