<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"><HTML DIR=ltr><HEAD><META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1"></HEAD><BODY><DIV><FONT face='Arial' color=#000000 size=2>I am using the 10-31-03 alpha drivers and I can compile the
drivers fine. It's just when I do a modprobe that I get a few error
messages unrelated to my system which I can't figure out. One is an error
loading a bttv driver, and the other is a rivatv driver, both of which I don't
have installed on my system, AFAIK</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I am trying to get output working on my PVR
350</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Here's the log of when I try to do the modprobe
ivtv-fb:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV>[root@myth root]# tail -f /var/log/messages<BR>Nov 12 01:01:38 myth
modprobe: modprobe: Can't locate module sound-slot-1<BR>Nov 12 01:01:39 myth
modprobe: modprobe: Can't locate module sound-service-1-0<BR>Nov 12 01:01:39
myth modprobe: modprobe: Can't locate module sound-slot-1<BR>Nov 12 01:01:39
myth modprobe: modprobe: Can't locate module sound-service-1-0<BR>Nov 12
01:01:49 myth gconfd (root-4278): starting (version 2.2.0), pid 4278
user<BR> 'root'<BR>Nov 12 01:01:50 myth gconfd (root-4278): Resolved
address "xml:readonly:/etc/gco<BR>nf/gconf.xml.mandatory" to a read-only config
source at position 0<BR>Nov 12 01:01:50 myth gconfd (root-4278): Resolved
address "xml:readwrite:/root/.<BR>gconf" to a writable config source at position
1<BR>Nov 12 01:01:50 myth gconfd (root-4278): Resolved address
"xml:readonly:/etc/gco<BR>nf/gconf.xml.defaults" to a read-only config source at
position 2<BR>Nov 12 01:33:05 myth sshd(pam_unix)[9801]: authentication failure;
logname= uid=<BR>0 euid=0 tty=NODEVssh ruser= rhost=rayvns.rayva.org
user=root<BR>Nov 12 01:33:08 myth sshd(pam_unix)[9801]: session opened for user
root by (uid=<BR>0)<BR>Nov 12 01:38:03 myth kernel: i2c-core.o: i2c core module
version 2.8.0 (20030714<BR>)<BR>Nov 12 01:38:03 myth kernel: Linux video capture
interface: v1.00<BR>Nov 12 01:38:03 myth kernel: [saa7127.c: INFO]: SAA7127
video encoder driver loa<BR>ded<BR>Nov 12 01:38:03 myth kernel: ivtv:
SGarray_size = 200, DSGarray_size = 16<BR>Nov 12 01:38:03 myth kernel: ivtv:
Found an iTVC15 based chip<BR>Nov 12 01:38:03 myth kernel: PCI: Found IRQ 11 for
device 00:0f.0<BR>Nov 12 01:38:03 myth kernel: tuner: probing ivtv i2c driver #0
i2c adapter [id=0<BR>x10005]<BR>Nov 12 01:38:03 myth kernel: tuner: chip found @
0xc2<BR>Nov 12 01:38:03 myth kernel: tuner(bttv): type forced to 2 (Philips NTSC
(FI1236<BR>,FM1236 and compatibles)) [insmod]<BR>Nov 12 01:38:05 myth kernel:
saa7127: Configuring encoder...<6>saa7114.c: starti<BR>ng probe for
adapter ivtv i2c driver #0 (0x10005)<BR>Nov 12 01:38:05 myth kernel: saa7114.c:
detecting saa7114 client on address 0x42<BR>Nov 12 01:38:05 myth kernel:
saa7115.c: writing init values<BR>Nov 12 01:38:07 myth kernel: status: (1E)
0x89, (1F) 0xb1<BR>Nov 12 01:38:07 myth kernel: msp34xx: init: chip=MSP3448W-A2,
has NICAM support<BR>Nov 12 01:38:07 myth kernel: msp3410: daemon started<BR>Nov
12 01:38:10 myth kernel: ivtv: Encoder revision: 0x02040011<BR>Nov 12 01:38:10
myth kernel: ivtv: Decoder revision: 0x02020023<BR>Nov 12 01:38:10 myth kernel:
ivtv: No mem on buf alloc!<BR>Nov 12 01:38:10 myth kernel: ivtv: Buffer alloc
failed!<BR>Nov 12 01:38:10 myth kernel: ivtv: No mem on buf alloc!<BR>Nov 12
01:38:10 myth kernel: ivtv: Buffer alloc failed!<BR>Nov 12 01:38:10 myth kernel:
ivtv: No mem on buf alloc!<BR>Nov 12 01:38:10 myth kernel: ivtv: Buffer alloc
failed!<BR>Nov 12 01:38:10 myth kernel: ivtv: Registered v4l2 device, minor
0<BR>Nov 12 01:38:10 myth kernel: ivtv: Registered v4l2 device, minor 32<BR>Nov
12 01:38:10 myth kernel: ivtv: Registered v4l2 device, minor 224<BR>Nov 12
01:38:10 myth kernel: ivtv: Registered v4l2 device, minor 16<BR>Nov 12 01:38:10
myth kernel: lirc_dev: IR Remote Control driver registered, at m<BR>ajor
61<BR>Nov 12 01:38:10 myth kernel: bttv: driver version 0.7.104 loaded<BR>Nov 12
01:38:10 myth kernel: bttv: using 4 buffers with 2080k (8320k total)
for<BR>capture<BR>Nov 12 01:38:10 myth kernel: bttv: Host bridge is Intel Corp.
440LX/EX - 82443LX<BR>/EX Host bridge<BR>Nov 12 01:38:10 myth insmod:
/lib/modules/2.4.20-20_29.rh9.at/kernel/drivers/med<BR>ia/video/bttv.o:
init_module: No such device<BR>Nov 12 01:38:10 myth kernel: bttv: Host bridge
needs ETBF enabled.<BR>Nov 12 01:38:10 myth insmod: Hint: insmod errors can be
caused by incorrect modu<BR>le parameters, including invalid IO or IRQ
parameters. You may find more
i<BR>nformation in syslog or the output from dmesg<BR>Nov 12 01:38:10 myth
insmod: /lib/modules/2.4.20-20_29.rh9.at/kernel/drivers/med<BR>ia/video/bttv.o:
insmod bttv failed<BR>Nov 12 01:38:10 myth modprobe: modprobe: Can't locate
module rivatv<BR>Nov 12 01:38:10 myth kernel: lirc_i2c: chip found @ 0x18
(Hauppauge IR)<BR>Nov 12 01:38:10 myth kernel: lirc_dev:
lirc_register_plugin:sample_rate: 10<BR>Nov 12 01:38:10 myth kernel: ivtv:
You've not seen the last of willy!<BR>Nov 12 01:38:10 myth kernel: [saa7127.c:
INFO]: SAA7127 video encoder driver unl<BR>oaded</DIV>
<DIV> </DIV>
<DIV>And here's my command line output:</DIV>
<DIV> </DIV>
<DIV>[root@myth utils]# modprobe
ivtv-fb<BR>/lib/modules/2.4.20-20_29.rh9.at/kernel/drivers/media/video/ivtv-fb.o:
unresolve<BR>d symbol
ivtv_debug<BR>/lib/modules/2.4.20-20_29.rh9.at/kernel/drivers/media/video/ivtv-fb.o:
unresolve<BR>d symbol
ivtv_pal<BR>/lib/modules/2.4.20-20_29.rh9.at/kernel/drivers/media/video/ivtv-fb.o:
insmod /l<BR>ib/modules/2.4.20-20_29.rh9.at/kernel/drivers/media/video/ivtv-fb.o
failed<BR>/lib/modules/2.4.20-20_29.rh9.at/kernel/drivers/media/video/ivtv-fb.o:
insmod iv<BR>tv-fb failed</DIV>
<DIV> </DIV>
<DIV>Any help would be appreciated, and thanks in advance.</DIV>
<DIV> </DIV>
<DIV>mikejaner</DIV></BODY></HTML>