<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"><HTML DIR=ltr><HEAD><META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1"></HEAD><BODY>
<DIV><FONT face='Arial' color=#000000 size=2>Ok, I believe I
am so close. Not to mention I am so happy I made it this far being a
noob.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Alot of thanks to Jahrod BTW, for the kickass
tut</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I have installed RH9 with all the updates,
including the 2.4.20-20_29.rh9.at kernel</FONT></DIV>
<DIV><FONT face=Arial size=2>I have installed the CVS of Mythtv .12 and all is
well with it, cause I can watch live tv etc.....</FONT></DIV>
<DIV><FONT face=Arial size=2>I have enabled the PVR 350 output in the settings
for TV as /dev/video16</FONT></DIV>
<DIV><FONT face=Arial size=2>I have downloaded and compiled the IVTV alpha
drivers</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial color=#000000 size=2>Here's the little batch file I wrote,
cause I wanted to test before committing to /etc/modules.conf</FONT></DIV>
<DIV><FONT face=Arial color=#000000 size=2></FONT> </DIV>
<DIV><FONT face=Arial color=#000000 size=2>modprobe i2c-core<BR>modprobe
i2c-algo-bit<BR>modprobe tuner type=2<BR>modprobe msp3400<BR>modprobe
videodev<BR>insmod saa7127 enable_output=1 output_select=01
test_image=1<BR>insmod ivtv</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Per Jahrod's instructions for setting the recording
parameters, I did the following:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><!--StartFragment --> # /usr/lib/ivtv/test_ioctl -u 0x3000<BR>#
/usr/lib/ivtv/test_ioctl -p 4<BR># /usr/lib/ivtv/test_ioctl -f
width=720,height=480<BR># /usr/lib/ivtv/test_ioctl -v input=4,output=1<!--StartFragment --></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>After I run the little batch file, I get the
appropriate loaded responses, and I get the test pattern on the TV,
Wohoo!!</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I then proceed to launch mythbackend, and open
mythfrontend</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I then navigate to TV and Livetv, and it all goes
to $#!T</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>As noted below</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial color=#000000 size=2>Here's my MythBackend running during
this timeframe:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial color=#000000 size=2>Starting up as the master
server.<BR>2003-10-26 18:56:02 Enabled verbose msgs : important
general<BR>2003-10-26 18:56:04 Found changes in the todo list.<BR>2003-10-26
19:01:32 MainServer::HandleAnnounce Playback<BR>2003-10-26 19:01:32 adding:
mythbox as a player 1<BR>2003-10-26 19:01:32 MainServer::HandleAnnounce
Playback<BR>2003-10-26 19:01:32 adding: mythbox as a player 0<BR>2003-10-26
19:01:32 MainServer::HandleAnnounce Playback<BR>2003-10-26 19:01:32 adding:
mythbox as a player 0<BR>2003-10-26 19:01:32 adding: mythbox as a remote
ringbuffer<BR>2003-10-26 19:01:32 Changing from None to WatchingLiveTV<BR>error
reading from: /dev/video0<BR>read: Input/output error<BR>error reading from:
/dev/video0<BR>read: Input/output error<BR>error reading from:
/dev/video0<BR>read: Input/output error<BR>error reading from:
/dev/video0<BR>read: Input/output error<BR>Couldn't read data from the capture
card in 15 seconds. Game over, man.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Can anybody lend me a hand and tell me what is
wrong? I very much appreciate any help.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Mike Janer</FONT></DIV>
<DIV><FONT face=Arial size=2><A
href="mailto:mike@janernet.com">mike@janernet.com</A></FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=Arial color=#000000 size=2></FONT> </DIV></BODY></HTML>