<DIV>Still having trouble, even after installing transcode. Script output is below. </DIV>
<DIV> </DIV>
<DIV>One thought - I haven't bothered marking commercials; could there be a problem when there is no cutlist? While mp2enc is running, the frame count zips along but note</DIV>
<DIV> </DIV>
<DIV>frame= 3 q=0.0 size= 1013kB time=0.1 bitrate=82865.9kbits/s<BR></DIV>
<DIV>---------------------------</DIV>
<DIV> </DIV>
<DIV>Choose a function: 1</DIV>
<DIV>Where would you like to export the files to? [./]<BR>Output filename [The Implant].mpg? The_Implant<BR>No cutlist found. Hopefully this means that you already removed the commercials.<BR>Audio bitrate? [192]<BR>Maximum video bitrate for VBR? [2500]<BR>VBR quality/quantisation (2-31)? [5]<BR>Enable noise reduction (slower, but better results)? [Yes]<BR>2003-08-31 17:53:03 Transcoding from /var/video/1004_20030830190000_20030830193000.nuv to /var/video/1004_20030830190000_20030830193000.nuv.tmp<BR>2003-08-31 17:53:03 Enforcing sync on fifos<BR>2003-08-31 17:53:03 Created video fifo: fifodir/vidout<BR>2003-08-31 17:53:03 Created audio fifo: fifodir/audout<BR>2003-08-31 17:53:03 Video <A href="mailto:480x480@29.97fps">480x480@29.97fps</A> Audio rate: 32000<BR>2003-08-31 17:53:03 Created fifos. Waiting for connection.<BR>2003-08-31 17:53:03 Audio is 53ms ahead of video at # 1<BR>Waiting for mythtranscode to set up the fifos.<BR>No header found. Assuming Raw PCM sound
file<BR>--------------------------------------------<BR>Input File : 'fifodir/audout' 32.0 kHz<BR>Output File: '1004_20030830190000_20030830193000.mp2'<BR>192 kbps MPEG-1 Layer II j-stereo Psy model 1<BR>[De-emph:Off Copyright:No Original:No CRC:Off]<BR>[Padding:Normal Byte-swap:Off Chanswap:Off DAB:Off]<BR>ATH adjustment 0.000000<BR>--------------------------------------------<BR>encode_init: using tablenum 1 with sblimit 30<BR> INFO: [yuvdenoise] ========================================================<BR> INFO: [yuvdenoise] Y4M2 Motion-Compensating-YCrCb-Denoiser<BR> INFO: [yuvdenoise] ========================================================<BR> INFO: [yuvdenoise] Version: MjpegTools 1.6.1<BR> INFO: [yuvscaler] yuvscaler (version 1.6.1) is a general
scaling utility for yuv frames<BR> INFO: [yuvscaler] (C) 2001 Xavier Biquard <<A href="mailto:xbiquard@free.fr">xbiquard@free.fr</A>><BR> INFO: [yuvscaler] yuvscaler -h for help, or man yuvscaler<BR>Input #0, rawvideo, from 'fifodir/vidout':<BR> Duration: N/A, bitrate: N/A<BR> Stream #0.0: Video: rawvideo, yuv420p, 480x480, 29.97 fps<BR>Output #0, yuv4mpegpipe, to 'pipe:':<BR> Stream #0.0: Video: rawvideo, yuv420p, 480x480, 29.97 fps, q=2-31, 200 kb/s<BR>Stream mapping:<BR> Stream #0.0 -> #0.0<BR>Press [q] to stop encoding<BR> INFO: [yuvdenoise]<BR> INFO: [yuvdenoise] Denoiser - Settings:<BR> INFO: [yuvdenoise] --------------------<BR> INFO: [yuvdenoise]<BR> INFO: [yuvdenoise] Mode : Progressive frames<BR> INFO: [yuvdenoise] Deinterlacer
: Off<BR> INFO: [yuvdenoise] Postprocessing : On<BR> INFO: [yuvdenoise] Frame border : x: 0 y: 0 w:480 h:480<BR> INFO: [yuvdenoise] Search radius : 16<BR> INFO: [yuvdenoise] Filter delay : 3<BR> INFO: [yuvdenoise] Filter threshold : 5<BR> INFO: [yuvdenoise] Pass 2 threshold : 4<BR> INFO: [yuvdenoise] Y - contrast : 100 %<BR> INFO: [yuvdenoise] Cr/Cb - contrast : 100 %<BR> INFO: [yuvdenoise] Sharpen : 125 %<BR> INFO: [yuvdenoise]<BR> INFO: [yuvdenoise] Sorry, no SIMD optimisations available.<BR>2003-08-31 17:53:04 Audio is 44ms ahead of video at # 4<BR> INFO: [mpeg2enc] Selecting
SVCD output profile<BR>++ WARN: [mpeg2enc] Generating dummy SVCD scan-data offsets to be filled in by "vcdimager"<BR>++ WARN: [mpeg2enc] If you're not using vcdimager you may wish to turn this off using -d<BR> INFO: [mpeg2enc] Encoding MPEG-2 video to 1004_20030830190000_20030830193000.m2v<BR> INFO: [mpeg2enc] Horizontal size: 480 pel<BR> INFO: [mpeg2enc] Vertical size: 480 pel<BR> INFO: [mpeg2enc] Aspect ratio code: 2 = 4:3 display<BR> INFO: [mpeg2enc] Frame rate code: 4 = 30000.0/1001.0 (NTSC VIDEO)<BR> INFO: [mpeg2enc] Bitrate: 2500 KBit/s<BR> INFO: [mpeg2enc] Quality factor: 5 (1=best, 31=worst)<BR> INFO: [mpeg2enc] Field order for input: none/progressive<BR> INFO: [mpeg2enc] New Sequence every 795 Mbytes<BR> INFO: [mpeg2enc] Assuming non-video stream of 192 Kbps<BR> INFO: [mpeg2enc] Search radius: 24<BR> INFO: [mpeg2enc] GOP
SIZE RANGE 9 TO 15<BR> INFO: [mpeg2enc] Setting colour/gamma parameters to "unspecified"<BR> INFO: [mpeg2enc] Progressive format frames = 1<BR> INFO: [mpeg2enc] Buffering 39 frames<BR>2003-08-31 17:54:30 Audio is 61ms ahead of video at # 7806kbits/s<BR>2003-08-31 17:54:42 Audio is 43ms ahead of video at # 8855kbits/s<BR>2003-08-31 17:56:35 Audio is 36ms ahead of video at # 19347bits/s<BR>2003-08-31 17:57:01 Audio is 36ms behind video at # 216729kbits/s<BR>2003-08-31 17:59:36 Audio is 34ms behind video at # 360269kbits/s<BR>2003-08-31 18:01:40 Audio is 34ms ahead of video at # 47458bits/s<BR>2003-08-31 18:02:32 Audio is 34ms behind video at # 522539kbits/s<BR>frame= 3 q=0.0 size= 1013kB time=0.1 bitrate=82865.9kbits/s<BR>Hit end of audio data<BR>Avg slots/frame = 864.000; b/smp = 6.00; bitrate = 192.000 kbps</DIV>
<DIV>Done<BR>2003-08-31 18:02:50 Transcoding /var/video/1004_20030830190000_20030830193000.nuv done<BR> INFO: [mpeg2enc] GOP LENGTH = 3<BR> INFO: [mpeg2enc] Frame start 0 I 0 0</DIV>
<DIV>INFO: using reference profile (SVCD)<BR>INFO: profile type is (PAL)</DIV>
<DIV>ERROR: Unable to read from file 1004_20030830190000_20030830193000.m2v.</DIV>
<DIV><BR>Thanks for using myth_export!</DIV>
<DIV>[alan@localhost MythTV]$ INFO: [mpeg2enc] Frame end 0 173.64 173.64 15.0 15.03<BR> INFO: [mpeg2enc] Frame start 1 P 2 2<BR> INFO: [mpeg2enc] Frame end 1 65.68 239.32 8.7 23.73<BR> INFO: [mpeg2enc] Frame start 2 B 1 1<BR> INFO: [mpeg2enc] Frame end 2 44.03 283.35 8.8 32.53<BR> INFO: [mpeg2enc] GOP LENGTH = 0<BR><BR><BR><B><I>Chris Petersen <lists@forevermore.net></I></B> wrote:</DIV>
<BLOCKQUOTE class=replbq style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">ok, I just (hopefully) fixed the mp2enc stuff. Please let me know if it<BR>works properly.<BR><BR>-Chris<BR><BR>_______________________________________________<BR>mythtv-users mailing list<BR>mythtv-users@mythtv.org<BR>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users</BLOCKQUOTE><p><hr SIZE=1>
Do you Yahoo!?<br>
<a href="http://us.rd.yahoo.com/evt=10469/*http://sitebuilder.yahoo.com">Yahoo! SiteBuilder</a> - Free, easy-to-use web site design software