[mythtv-users] HDHOMERUN on different network
Barry Martin
barry3martin at gmail.com
Mon Mar 6 13:44:17 UTC 2023
> I have two properties in different geo's with an IPSEC tunnel between
> them. I want to setup an HDHOMERUN in location B and have the backend
> at location A use it.
> Location A is 192.168.0.x addressed. Location B is 10.0.0.x addressed.
As the others have said, a computer on one network will not see a
computer on another, BUT one can tell a computer to have a second IP
address. I have only tried it with a different subnet (?) -- whatever
the third set in the dotted quad is called. My original was
192.168.4.x, wanting to look at 192.168.0.x. I haven't tried with the
10.x.x.x group but seems like it should work.
On a computer with a static address of 192.168.4.22 I entered:
sudo ip addr add 192.168.0.199/24 broadcast 192.168.0.255 dev enp1s0
Now the machine has both 192.168.4.22 and 192.168.0.199 and can
communicate with machines on both networks. Good news is on reboot the
added address goes away so if a mistake is made it is not permanent.
The 'enp1s0' at the end is the NIC device (can be determined from the
ifconfig output).
Good Luck! Hope this either solves your problem or leads you to a solution!
Barry
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mythtv.org/pipermail/mythtv-users/attachments/20230306/c9cb0e56/attachment.htm>
More information about the mythtv-users
mailing list