[mythtv-users] Hauppauge WinTV-quadHD issues

Daryl McDonald darylangela at gmail.com
Tue Feb 2 20:36:34 UTC 2021

On Tue, Feb 2, 2021 at 2:52 PM Simon Hobson <linux at thehobsons.co.uk> wrote:

> I've just pulled out my old HVR-1250 (IIRC) cards and replaced them with a
> new QuadHD card. It's working fine, giving me 4 tuners (and eliminating the
> recording errors due to poor signal*), but I've a couple of issues :
> I can't find where to configure multi-rec.
> That's one of those "so long sine I last did it, can't remember how I did
> it" things.
> According to
> https://www.mythtv.org/wiki/Record_multiple_channels_from_one_multiplex
> it's just a case of going into the advanced settings and setting the number
> of virtual tuners, and that's how I vaguely remember doing it. But it's
> just not there in my setup.
> It's shown as Silicon Labs Si2168 and subtype DVB-T2 - but no advanced
> settings option.
> It's not finding any DVB-T2 muxes.
> I should be getting at least 1 T2 mux, according to
> https://ukfree.tv/transmitters/tv/Winter_Hill the PSB3/BBCB mux should be
> on 585.8MHz. It's not found by a full scan, nor by a "scan an existing
> transport and find any linked ones" option. I suspect Com7 on 746MHz will
> be out of band for my aerial so I'm not bothered about that.
> Any thoughts ?
> Simon
> * having two cards I needed to use a splitter - so lost a lot of signal
> strength. It was fine when I first set it up here, but has degraded to the
> point where I had to remove the splitter and disable one of the cards -
> thus hitting limitations with only one real tuner.
> _______________________________________________
> This may depend on theme and version, but on my steppes wide v 31 its:

BE set-up>input connections>DVB adapter0 frontend0>interactions between
inputs>max recordings.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mythtv.org/pipermail/mythtv-users/attachments/20210202/50cd6c29/attachment.htm>

More information about the mythtv-users mailing list