[mythtv-users] haupauge

[John Pilkington]

On 05/06/2020 10:04, jam wrote:
>   
> 
>> On 3 Jun 2020, at 8:13 pm, Klaas de Waal <klaas.de.waal at gmail.com> wrote:
>>
>>
>> There is a subtle entry in the log
>>
>> 2020-06-03 10:27:29.993036 W [27922/27922] CoreContext dtvmultiplex.cpp:340 (ParseDVB_T2) - DTVMux: Undefined modulation system, using DVB-T2.
>>
>> What is. even more frustrating I put my lucky-packet cards in (Leadteck that pixcelate on HD) and everything works perfectly with no further setup.
>>
>>
>> You can also check the "Delivery system" setting for the capture cards. You have the choice between all that your card supports and it should be set to DVB-T2 if you card can do that.
>> With that setting you can also receive the DVB-T multiplexes.
>>   
>> Klaas.
>>
> 
> Opinion please
> could we be looking at kernel versions.  (again: running this on open-suse leap 15.1 on version 30 DOES	work)
> 
> Running ubuntu, which works for someone ...
> 
> 2020-06-05 16:19:14.514575 I  CardUtil[1]: Set delivery system: DVB-T2
> 2020-06-05 16:19:14.516633 W  DVBSigMon[1](/dev/dvb/adapter0/frontend0): Cannot measure S/N
> 			eno: Unknown error 524 (524)
> 2020-06-05 16:19:14.516656 W  DVBSigMon[1](/dev/dvb/adapter0/frontend0): Cannot measure Bit Error Rate
> 			eno: Unknown error 524 (524)
> 2020-06-05 16:19:14.516675 W  DVBSigMon[1](/dev/dvb/adapter0/frontend0): Cannot count Uncorrected Blocks
> 			eno: Unknown error 524 (524)
> 2020-06-05 16:19:47.424934 C  'SignalMonitor': MThread prolog was never run!
> 
> 
> jam at venus:~$ lsusb
> Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Bus 001 Device 004: ID 8087:0a2b Intel Corp.
> Bus 001 Device 006: ID 045e:0750 Microsoft Corp. Wired Keyboard 600
> Bus 001 Device 005: ID 04b3:310b IBM Corp. Red Wheel Mouse
> Bus 001 Device 003: ID 05e3:0608 Genesys Logic, Inc. Hub
> Bus 001 Device 002: ID 2040:0265 Hauppauge dualHD
> 
> James

How about 'dmesg | grep adapter' or 'dmesg | grep firmware' or 'dmesg | 
grep -i dvb'  ?