[mythtv-users] HDHR replaced but MythTV cannot find the tuner

[R Kannan]

A reboot seems to have fixed it.... The Live TV works now and the 
nythweb shows...

Encoder 5 [ HDHOMERUN : 104E4F32-0 ] is local on HP-DVR and is not 
recording.
Encoder 6 [ HDHOMERUN : 104E4F32-0 ] is local on HP-DVR and is not 
recording.
Encoder 7 [ HDHOMERUN : 104E4F32-1 ] is local on HP-DVR and is not 
recording.
Encoder 8 [ HDHOMERUN : 104E4F32-1 ] is local on HP-DVR and is not 
recording.

Thanks

On 6/29/19 5:41 PM, R Kannan wrote:
> All,
>
> My old HDHomeRun - Dual tuner had quit and I bought a new HDHR3 
> Connect tuner to replace it.
>
> I tested it with HD HomeRun Config GUI and it seemed to tune into my 
> OTR channels.
>
> In MythTV Backend setup, I removed all cards, added the new cards (2), 
> created the connections, scanned for and added the channels and 
> everything looked OK. But when I tried to run the frontend and tried 
> to watch Live TV, it came back with "All Tuners are currently busy" .
>
> I checked the mythweb Status and it showed 4 'Encoders' with two of 
> them missing as below:
>
> Encoder 1 [ UNKNOWN ] is local on HP-DVR and is not recording.
> Encoder 2 [ UNKNOWN ] is local on HP-DVR and is not recording.
> Encoder 5 [ HDHOMERUN : 104E4F32-0 ] is local on HP-DVR and is not 
> recording.
> Encoder 6 [ HDHOMERUN : 104E4F32-0 ] is local on HP-DVR and is not 
> recording.
>
> Perhaps the old card was not completely deleted and it is trying to 
> tune using the old card that does not exist.
>
> Any thoughts?
>
> Thanks for any help.
>