[mythtv-users] HDPVR, Sonoff and find-zero-byte.pl

[Greg Oliver]

On Thu, Sep 6, 2018 at 9:31 PM Greg Oliver <oliver.greg at gmail.com> wrote:

> On Thu, Sep 6, 2018 at 9:15 PM Rajil Saraswat <rajil.s at gmail.com> wrote:
>
>> On 09/06/2018 08:44 AM, Greg Oliver wrote:
>>
>>
>>
>> That is very old information.  I can honestly not even remember the last
>> time I had to reboot a 1212.  I did find that once I moved them from the
>> top of my DTV receivers (which ran semi-hot), they actually have never
>> locked up again.  You might just make sure they have the latest firmware -
>> well, I use:
>>
>> hdpvr 1-1.3:1.0: firmware version 0x1e dated Mar  7 2012 08:25:15
>>
>> It has been rock solid for me.
>>
>> -Greg
>>
>>
>> _______________________________________________
>> mythtv-users mailing listmythtv-users at mythtv.orghttp://lists.mythtv.org/mailman/listinfo/mythtv-usershttp://wiki.mythtv.org/Mailing_List_etiquette
>> MythTV Forums: https://forum.mythtv.org
>>
>> I am using the same firmware, "firmware version 0x1e dated Mar  7 2012
>> 08:25:15"
>>
>> I get the following error after running for a few minutes,
>>
>> 2018-09-06 21:00:01.965351 I [21810/25389] RecThread tv_rec.cpp:863
>> (FinishedRecording) - TVRec[1]:
>> FinishedRecording(1110_2018-09-07T01:52:24Z) damaged recq:<RecordingQuality
>> overall_score="0" key="1110_2018-09-07T01:52:24Z"
>> countinuity_error_count="0" packet_count="1284099">
>>     <Gap start="2018-09-07T01:30:00Z" end="2018-09-07T01:52:25Z"
>> duration="1345" />
>> </RecordingQuality>
>>
>> 2018-09-06 21:00:01.968305 I [21810/21810] CoreContext
>> mythsystemevent.cpp:308 (customEvent) - MythSystemEventHandler: Starting
>> thread for command '/usr/local/bin/find-zero-byte.pl 1 1110
>> 2018-09-06T20:52:24 cancel'
>> 2018-09-06 21:00:02.048480 I [21810/11124] ProcessRequest
>> mainserver.cpp:1738 (HandleAnnounce) - MainServer: MainServer::ANN Monitor
>> 2018-09-06 21:00:02.048484 I [21810/11124] ProcessRequest
>> mainserver.cpp:1743 (HandleAnnounce) - MainServer: adding:
>> desktop(7f513803ec50) as a client (events: 0)
>> 2018-09-06 21:00:02.048914 I [21810/11347] MythSocketThread(60)
>> mainserver.cpp:7643 (connectionClosed) - Monitor sock(7f513803ec50)
>> 'desktop' disconnected
>> 2018-09-06 21:00:02.098366 W [21810/11335] SystemEvent
>> mythsystemevent.cpp:55 (run) - MythSystemEventHandler: Finished
>> '/usr/local/bin/find-zero-byte.pl 1 1110 2018-09-06T20:52:24 cancel'
>> result 140
>> 2018-09-06 21:00:50.692419 I [21810/11123] MythSocketThread(47)
>> mainserver.cpp:7643 (connectionClosed) - Monitor sock(55d4b3a3f0e0)
>> 'desktop' disconnected
>> 2018-09-06 21:00:50.711580 W [21810/31330] SystemEvent
>> mythsystemevent.cpp:55 (run) - MythSystemEventHandler: Finished
>> '/usr/local/bin/find-zero-byte.pl 1 1110 2018-09-06T21:00:00' result 140
>> 2018-09-06 21:01:10.981974 E [21810/25406] DeviceReadBuffer
>> recorders/DeviceReadBuffer.cpp:545 (Poll) - DevRdB(/dev/video1): Poll
>> giving up after 2500ms
>> 2018-09-06 21:01:10.982000 E [21810/25389] RecThread
>> recorders/mpegrecorder.cpp:1070 (run) - MPEGRec[1](/dev/video1): Device
>> error detected
>> 2018-09-06 21:01:24.889956 W [21810/25389] RecThread
>> recorders/mpegrecorder.cpp:851 (SetV4L2DeviceOptions) -
>> MPEGRec[1](/dev/video1): Unable to set audio input.
>> 2018-09-06 21:01:27.142838 E [21810/25389] RecThread
>> recorders/mpegrecorder.cpp:1420 (StartEncoding) - MPEGRec[1](/dev/video1):
>> StartEncoding: read failed, retry in 100 msec:
>>                         eno: Input/output error (5)
>> 2018-09-06 21:01:28.358845 E [21810/25389] RecThread
>> recorders/mpegrecorder.cpp:1420 (StartEncoding) - MPEGRec[1](/dev/video1):
>> StartEncoding: read failed, retry in 200 msec:
>>                         eno: Input/output error (5)
>>
>> The full log is at https://pastebin.com/847aE6Pn
>>
>
> Make sure all the cables are fully seated and the USB cable is not too
> long.  Are there any messages in `dmesg' or journalctl regarding the 1212?
>
> -Greg
>


It looks like you might have some improper module options running too::

2018-09-06 21:01:24.889956 W [21810/25389] RecThread
recorders/mpegrecorder.cpp:851 (SetV4L2DeviceOptions) -
MPEGRec[1](/dev/video1): Unable to set audio input.

Cannot get audio.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mythtv.org/pipermail/mythtv-users/attachments/20180906/d93cc72a/attachment.html>