[mythtv-users] MythTV Light installation

Jerry mythtv at hambone.e4ward.com
Sat Oct 6 22:45:59 UTC 2018


On Sat, Oct 6, 2018 at 6:37 PM James Abernathy <jfabernathy at gmail.com>
wrote:

>
> On 10/06/2018 03:16 PM, Jerry wrote:
>
> On Sat, Oct 6, 2018 at 2:48 PM James Abernathy <jfabernathy at gmail.com>
> wrote:
>
>> So I now have my RP3+ and I used Etcher to install the RP Stretcher from
>> 2017-11-29.  However when I turn on the RP3+, I just get the multicolor
>> screen and the board has a blinking Green LED in some pattern.
>>
>> Did I miss a step?  I just downloaded the .zip file for Stretcher,
>> Flashed the microSD with Etcher, and plugged it in.
>>
>>
> That sounds like a kernel problem.  I know that the 3B+ needs a newer
> kernel.  I don't think that was reflected in Raspbian until at least the
> RPi 3B+ release date of 3/14/18.
>
> There may be a way for you to only upgrade the kernel by chrooting into
> that distribution from another Raspberry Pi, perhaps by installing current
> Raspbian on another card and mounting the target 11/29/17 Raspbian card
> with a USB reader.
>
> It's a pain but I bet that will work.  I've done similar things with other
> single board computers.  The end will be 11/29/17 with an upgraded kernel.
> Which version to pick is another story.  Perhaps the latest one, perhaps
> not.  You could try the oldest kernel made after 3/14/18 I suppose.
>
> You might have to grab the actual .deb file and upgrade it manually with
> dpkg -i.  I'm not very familiar with Debian-based distributions.  Perhaps
> there is a limited upgrade apt command that will do it.
>
> Good luck.  If you get stuck I can do it in parallel here.  I have spare
> microSD cards and a RPi3B+.
>
>
> So I downloaded the latest Raspbian for RP3+
> (2018-06-27-raspbian-stretch.zip) and used Etcher to flash it to a 32GB
> microSD and this one booted fine.  I'm going to try and get MythTV Lite
> running on it like I didn't know any better and see what happens.
>
> Jim A
>
>
> Well this is interesting.  Mythtv light works okay on the Raspbian
>  2018-06-27 and I did a full update.  Then I install Mythtv Light.  I
> didn’t try much performance tuning yet, but it seems to work fine. I’m
> using HDMI video to a A/V receiver and the receiver sends the audio to 5.1
> speakers and video to my UHD TV. Setting audio to OpenMAX:hdmi and Video
> Playback profile to OpenMAX Normal.
>
> I can see some performance issues, but I still have to play with tuning.
>
> I did get my Harmony Smart Hub remote paired to the bluetooth on the RP3+.
> No issues there.
>
> I’ve bought a MPEG2 license but I don’t have the code yet.
>
> More later after I’ve had time to tune.
>
>
Good.  Chroot is a pain.  But doable.

It looks like the firmware in the older image is the culprit and not the
kernel as I thought:

https://github.com/Debian/raspi3-image-spec/issues/12

All I know is, there was a Raspbian image that was released before
3/14/18.  I tried it on my 3+ and it didn't work, blinked like you said.  2
days later, the fix was out.  It was a hot topic on the forums at the
time.  I just had to do a full upgrade with an older Rpi 2 and then it
booted.

If you have problems, and it sounds like you don't have any glaring ones,
my offer still stands.  I can try going through in the next day or so and
give you the steps.  It won't take me long.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mythtv.org/pipermail/mythtv-users/attachments/20181006/fa6ab28d/attachment-0001.html>


More information about the mythtv-users mailing list