[mythtv-users] Recordings problems after FCC bandwidth grab
Jim Abernathy
jfabernathy at gmail.com
Mon Nov 5 12:34:46 UTC 2018
On 11/5/18 7:01 AM, Michael T. Dean wrote:
> On 11/02/2018 05:01 PM, Christopher Sean Hilton wrote:
>> On Sat, Oct 27, 2018 at 12:18:42AM -0400, John Wolf wrote:
>>> Hello,
>>> I have a myth system that started as a mythbuntu system with .25
>>> & Ubuntu 12.04
>>> running an us ota hdhr. It is currently on Myth .27. When a
>>> couple of the
>>> stations had to give up their spectrum they combined their
>>> transmissions with
>>> their sister stations in the same area.
>>> Ever since, recording shows on these channels most of the time
>>> the recording
>>> stops before the end of the show and later recrecordings on
>>> other channels fail.
>>> I have deleted all the tuner, channel and transport data and
>>> rescanned the
>>> channels. At this point channel 26 is being transmitted by
>>> channel 2, and
>>> channel 45 is transmitted by channel 22. All the schedule data
>>> is being received
>>> for all the channels and it starts recording the shows but has
>>> problems after the
>>> shows start. If it is just recording shows from the channels
>>> that did not change
>>> it works fine.
>>> I wondered if anyone has seen this behavior after the changing
>>> of the channels.
>>> Thanks for any suggestions.
>>> John
>> The FCC project is called "Repack". I also started with mythbuntu and
>> upgraded as far as I could. I get OTA channels from a set of HDHomeRun
>> devices that are connected to antenna feeds in my attic. This is
>> because it's easier to get TCP/IP into my basement where the mythtv is
>> than it would be get get raw coax from the attic antenna feeds.
>>
>> For "Repack" I had to delete my HDHomeRun tuners, then rescan
>> them. The last step was to re-attach each channel to the it's schedule
>> data. This worked fine for me but we are only in the first phase of
>> repack here. Before I did this I got blank recordings because the
>> mythtv would improperly program the HDHomeRun's tuner.
>
> Yeah, you're almost definitely leaving something configured for the
> old channel information that's causing the problem. I have no idea
> what, specifically, but the easiest way to ensure you get a clean scan
> is to "Delete all Video Sources" in mythtv-setup and then
> reconfigure. See https://lists.gt.net/mythtv/users/264034#264034 .
>
> Mike
Is there a way to know if the local TV stations are doing this change to
OTA channels? I remember several years ago they had PSA commercials to
remind everyone to rescan their TVs to pick up the changes. That was
before I built my latest mythtv.
Jim A
More information about the mythtv-users
mailing list