[mythtv-users] 0.28 Upgrade niggles

[Andre Newman MythTV]

Thanks for trying to help but the list was down while I was home, I’m off on business trips until next week. I could turn it all on remotely but it’s much easier when I’m home.

I found the keytable file that Minimyth2 uses so I’ll give that a try next week, the Harmony remote is programmed to match Minimyth2 so that should be the best solution… hopefully.

Andre


> On 14 Feb 2017, at 10:20, Vincent McIntyre <vincent.mcintyre at gmail.com> wrote:
> 
> On 2/12/17, Andre MythTV <mythtv-list at dinkum.org.uk> wrote:
> <snip>
>> I’ve checked for events with evtest and ir-keytable -t and it all seems in
>> order, I can see a bunch of inputs including my USB MCE remote receiver, I
>> can press buttons and get plausible key codes like
>> 1486853529.221702: event type EV_MSC(0x04): scancode = 0x800f0422
>> 1486853529.221702: event type EV_SYN(0x00).
>> 1486853529.471522: event type EV_KEY(0x01) key_up: KEY_OK(0x0160)
>> 1486853529.471522: event type EV_SYN(0x00).
>> 1486853532.460692: event type EV_MSC(0x04): scancode = 0x800f0416
>> 1486853532.460692: event type EV_KEY(0x01) key_down: KEY_PLAY(0x00cf)
>> 1486853532.460692: event type EV_SYN(0x00).
>> 1486853532.566685: event type EV_MSC(0x04): scancode = 0x800f0416
>> 1486853532.566685: event type EV_SYN(0x00).
>> 1486853532.815519: event type EV_KEY(0x01) key_up: KEY_PLAY(0x00cf)
>> 1486853532.815519: event type EV_SYN(0x00).
>> 1486853534.004682: event type EV_MSC(0x04): scancode = 0x800f0418
>> 1486853534.004682: event type EV_KEY(0x01) key_down: KEY_PAUSE(0x0077)
>> 1486853534.004682: event type EV_SYN(0x00).
>> 1486853534.110677: event type EV_MSC(0x04): scancode = 0x800f0418
>> 1486853534.110677: event type EV_SYN(0x00).
>> 1486853534.359528: event type EV_KEY(0x01) key_up: KEY_PAUSE(0x0077)
>> 1486853534.359528: event type EV_SYN(0x00).
>> 
>> 
>> but only the up down left right buttons do anything in MythTV.
>> 
> 
> Your remote may have only partial kernel support. I am going through
> that now with a dvico one. Also, you may have to remap some of the key
> codes - for example all keycodes above decimal 127 seem to be getting
> ignored in my case.
> 
> Can you post the output from 'sudo ir-keytable' and 'sudo ir-keytable -r rc0' ?
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://lists.mythtv.org/mailman/listinfo/mythtv-users
> http://wiki.mythtv.org/Mailing_List_etiquette
> MythTV Forums: https://forum.mythtv.org