[mythtv-users] Analog cable on an HP KS523AA.
Matt Gracie
matt at roadflares.org
Sat Jan 9 19:24:46 UTC 2016
On 01/09/2016 01:57 PM, Gary Buhrmaster wrote:
> On Sat, Jan 9, 2016 at 6:33 PM, Matt Gracie <matt at roadflares.org> wrote:
>> Is anyone using an HP KS523AA USB tuner (a rebadged Haupp 950Q, from
>> what I've read) to record analog cable?
>
> First, do you have a 950Q equivalent or a 955Q? Apparently
> the newer version (often received if you order a 950Q) requires
> a fairly new kernel. What are the kernel messages at device
> initialization?
First of all, thanks so much for the response!
From dmesg:
[ 1.921940] usb 2-3: new high-speed USB device number 4 using xhci_hcd
[ 2.072097] usb 2-3: New USB device found, idVendor=2040, idProduct=7217
[ 2.072101] usb 2-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=10
[ 2.072103] usb 2-3: Product: HP Digital/Analog TV
[ 2.072105] usb 2-3: Manufacturer: HP
[ 2.072106] usb 2-3: SerialNumber: 4032679161
[...snip...]
[ 11.822356] au0828: i2c bus registered
[ 11.959630] tveeprom 7-0050: Hauppauge model 72211, rev B3F0, serial#
6147321
[ 11.959634] tveeprom 7-0050: MAC address is 00:0d:fe:5d:cc:f9
[ 11.959636] tveeprom 7-0050: tuner model is Xceive XC5000 (idx 150,
type 76)
[ 11.959638] tveeprom 7-0050: TV standards NTSC(M) ATSC/DVB Digital
(eeprom 0x88)
[ 11.959640] tveeprom 7-0050: audio processor is AU8522 (idx 44)
[ 11.959641] tveeprom 7-0050: decoder processor is AU8522 (idx 42)
[ 11.959642] tveeprom 7-0050: has no radio, has IR receiver, has no IR
transmitter
[ 11.959644] hauppauge_eeprom: hauppauge eeprom: model=72211
[ 11.963509] au8522 7-0047: creating new instance
[ 11.963513] au8522_decoder creating new instance...
[ 11.968265] tuner 7-0061: Tuner -1 found with type(s) Radio TV.
[ 11.970863] xc5000 7-0061: creating new instance
[ 11.974270] xc5000: Successfully identified at address 0x61
[ 11.974272] xc5000: Firmware has not been loaded previously
[...snip...]
[ 12.879074] au8522 7-0047: attaching existing instance
[ 12.885677] xc5000 7-0061: attaching existing instance
[ 12.889104] xc5000: Successfully identified at address 0x61
[ 12.889105] xc5000: Firmware has not been loaded previously
[ 12.889107] DVB: registering new adapter (au0828)
[ 12.889111] usb 2-3: DVB: registering adapter 0 frontend 0 (Auvitek
AU8522 QAM/8VSB Frontend)...
[ 12.890271] Registered device AU0828 [Hauppauge HVR950Q]
[...snip...]
[ 33.152956] xc5000: waiting for firmware upload
(dvb-fe-xc5000-1.6.114.fw)...
[ 33.191602] xc5000: firmware read 12401 bytes.
[ 33.191604] xc5000: firmware uploading...
[ 34.344803] xc5000: firmware upload complete...
[ 129.957926] xc5000: waiting for firmware upload
(dvb-fe-xc5000-1.6.114.fw)...
[ 129.957968] xc5000: firmware read 12401 bytes.
[ 129.957969] xc5000: firmware uploading...
[ 131.116032] xc5000: firmware upload complete...
So, it appears to be recognized as a 950Q and load the firmware correctly.
After playing around a little more, I found out that it does seem to
tune analog cable with TVTime, although no sound plays. I set it back up
in Myth, and it's able to tune the default channel with an AUDIO
DISABLED warning; as soon as I try to change the channel, mythfrontend
locks up with a bunch of these in the log file.
From mythfrontend.log:
Jan 9 14:18:28 cupcake mythfrontend.real: mythfrontend[1973]: I
CoreContext mythplayer.cpp:5253 (SetDecoder) Player(0): Waited 10ms for
decoder lock
Jan 9 14:18:28 cupcake mythfrontend.real: mythfrontend[1973]: W Decoder
ringbuffer.cpp:1100 (WaitForReadsAllowed)
RingBuf(/var/lib/mythtv/livetv/1007_20160109191051.nuv): Taking too long
to be allowed to read..
--
http://www.roadflares.org/blog
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 259 bytes
Desc: OpenPGP digital signature
URL: <http://lists.mythtv.org/pipermail/mythtv-users/attachments/20160109/7da32547/attachment.sig>
More information about the mythtv-users
mailing list