[mythtv-users] HD PVR error no video signal at input 0
Rajil Saraswat
rajil.s at gmail.com
Sun Apr 3 23:57:42 UTC 2016
Hello,
I have an HD PVR 1212 which refuses to work. I tried the following
$cat /dev/video0 >file.ts
however i get an error message suggesting that the video signal is not
present (dmesg pasted below). To check this i connected a component
cable from the 'Out' port of HD PVR to the TV and sure enough there is a
video signal present which the TV showed.
I am stumped why HD PVR refuses to record even though it happily does
the video loopback?
$dmesg
[ 235.618546] usb 2-5: new high-speed USB device number 5 using ehci-pci
[ 235.810332] usb 2-5: New USB device found, idVendor=2040, idProduct=4903
[ 235.810342] usb 2-5: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 235.810347] usb 2-5: Product: Hauppauge HD PVR
[ 235.810352] usb 2-5: Manufacturer: AMBA
[ 235.810356] usb 2-5: SerialNumber: 00A673DC
[ 235.827469] hdpvr 2-5:1.0: firmware version 0x1e dated Mar 7 2012
08:25:15
[ 235.940489] hdpvr 2-5:1.0: magic request returned 8
[ 235.948983] hdpvr 2-5:1.0: config call request for value 0x1700
returned 1
[ 235.958116] hdpvr 2-5:1.0: config call request for value 0x1500
returned 1
[ 235.993033] hdpvr 2-5:1.0: config call request for value 0x1200
returned 1
[ 236.002426] hdpvr 2-5:1.0: config call request for value 0x1300
returned 1
[ 236.011808] hdpvr 2-5:1.0: config call request for value 0x2900
returned 1
[ 236.021448] hdpvr 2-5:1.0: config call request for value 0x2a00
returned 1
[ 236.029454] hdpvr 2-5:1.0: config call request for value 0x2b00
returned 1
[ 236.038839] hdpvr 2-5:1.0: config call request for value 0x2c00
returned 1
[ 236.048728] hdpvr 2-5:1.0: config call request for value 0x2d00
returned 1
[ 236.067875] hdpvr 2-5:1.0: control request returned 4
[ 236.078008] hdpvr 2-5:1.0: control request returned 1
[ 236.095657] hdpvr 2-5:1.0: control request returned 1
[ 236.095664] hdpvr 2-5:1.0: allocating 64 buffers
[ 236.122752] Registered IR keymap rc-hauppauge
[ 236.123025] input: i2c IR (HD-PVR) as /devices/virtual/rc/rc1/input7
[ 236.123135] rc1: i2c IR (HD-PVR) as /devices/virtual/rc/rc1
[ 236.123139] ir-kbd-i2c: i2c IR (HD-PVR) detected at i2c-0/0-0071/ir0
[Hauppage HD PVR I2C]
[ 236.132450] hdpvr 2-5:1.0: config call request for value 0x2900
returned 1
[ 236.153098] hdpvr 2-5:1.0: config call request for value 0x2a00
returned 1
[ 236.163484] hdpvr 2-5:1.0: config call request for value 0x2c00
returned 1
[ 236.225906] hdpvr 2-5:1.0: config call request for value 0x2b00
returned 1
[ 236.235158] hdpvr 2-5:1.0: config call request for value 0x2d00
returned 1
[ 236.257190] hdpvr 2-5:1.0: config call request for value 0x1200
returned 1
[ 236.270275] hdpvr 2-5:1.0: device now attached to video0
[ 253.341515] hdpvr 2-5:1.0: no video signal at input 0
[ 253.341521] hdpvr 2-5:1.0: start_streaming failed
Thanks
More information about the mythtv-users
mailing list