[mythtv-users] I think my HRHR Prime died...

[Joseph Fry]

>
> > I went ahead and put in a ticket with Silicon Dust since when my HDHR
>> ATSC
>> > died they gave me a good deal on a replacement. The response was it
>> COULD be
>> > the power supply. Well I don't have a lot (0) 5V 3A wall warts hanging
>> > around
>>
>> While the supply is rated 3A, it only requires 2.5A (newer ships
>> use a 2.5A supply, I am guessing that the 3A ones were cheaper
>> to acquire from the usual 3rd parties at the time), and then only to
>> be able to supply the (no known to exist) TA that actually takes
>> .5A for power via the USB port (all shipping TAs are self-powered).
>> So "for testing", a 2A supply is sufficient.
>>
>
> That helps a little, but 5V power supplies a lot less common than 12V :)
> I'm already looking at ebay but most ship from China or California, won't
> see it until Sep 10th. Tried RadioShack, but nothing there either.
>
>
>
>> Typically, the first thing to test is swap the ethernet cable and
>> port (on the switch), followed by the power supply, because
>> those are easiest to perform without more advanced equipment.
>>
>
> I really doubt it's my network equipment. Just bought a MkroTik Cloud
> Route Switch[1] and nothing else is having any issues, Tried two cables and
> multiple ports.
>
>
>
>> Note that the Prime PS bricks were slightly higher quality than
>> the original PS bricks on other devices, but everything fails,
>> and temperature (in a "closet", in the "summer") might contribute
>> to the failure.
>>
>
> The closet is not air conditioned but it never gets that warm in there.
>
>
>
>> SD does sell replacement power supplies at a nominal price
>> (via tickets, not on their web site), or you can source locally
>> (SD has the official specs on their forum at:
>> https://www.silicondust.com/forum/viewtopic.php?f=43&t=19203 ),
>> or via your favorite online retailer.  My recollection (I source locally,
>> so no personal experience) is that the D-Link 5V 3A supply on
>> Amazon works.
>>
>
> I found the same thing on Ebay but Amazon will likely have much faster
> shipping.
>

I am currently rebuilding my closet and all of my DC equipment is getting
powered by a single PC power supply (no more wall warts).   It's trivial to
splice the plug from your bad power supply onto a molex splitter (use red
and black for 5v, yellow and black for 12v).  I have a dedicated supply for
my equipment (4 HD PVRs at 5v and 4 Cisco STBs at 12v), but if you just
wanted to test it, you could easily use your backend's power supply to
power your HDHR.

Just cut the cord from your bad power brick, and splice it into the red and
black wires on a molex splitter or molex>sata adapter:
http://i.imgur.com/2NOiiJY.png (image shows splicing into the 12v, yellow
wires, but you get the idea)

Unless your overloading your power supply, pulling 2A off the 5v rail
shouldn't hurt anything (after all, your usb ports pull from the same rail,
and I wager you can safely charge a phone or two on your system)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mythtv.org/pipermail/mythtv-users/attachments/20150902/37b13679/attachment.html>