[mythtv-users] Can't get lirc or irw to work, but mode2 works
Jerry Rubinow
jerrymr at gmail.com
Sat Jun 27 05:48:27 UTC 2015
I tried reinstalling mythbuntu 14.04 again, same issue. Uninstalled lirc,
didn't help. I tried upgrading to Ubuntu 15.04, but same issue with the
irregular scan codes.
I tried installing the beta of Windows 10 and a Windows build of
mythfrontend from here, http://sourceforge.net/projects/mythtvwindows/
Mythfrontend started up and recognized button presses on the remote. So
it's not a hardware incompatibility between the IR receiver and the LIVA.
I tried two different MCE remotes and both cause the same issue with
scancodes. I've googled a lot and I haven't been able to find information
about trouble at this level.
On Mon, Jun 22, 2015 at 1:23 AM, Jerry Rubinow <jerrymr at gmail.com> wrote:
> On Sun, Jun 21, 2015 at 5:10 AM, Hika van den Hoven <hikavdh at gmail.com>
> wrote:
>
>> Hoi Jerry,
>>
>> Sunday, June 21, 2015, 6:21:10 AM, you wrote:
>>
>> > I have a newly setup LIVA box, frontend only, using the latest
>> mythbuntu.
>> > It has a USB ir receiver, and I configured lirc to use mceusb remote.
>>
>> > If I stop lircd and run mode2, it spews out data when I press buttons on
>> > the remote. So I know the hardware is working. However I can't get
>> irw to
>> > print anything. The receiver is the same ir receiver I was using with
>> my
>> > original frontend, configured the same way, although with an older
>> version
>> > of mythbuntu a few years ago.
>>
>> > Info from the new machine:
>>
>> > jerry at squeek:~$ lsusb
>> > Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
>> > Bus 001 Device 003: ID 1784:0008 TopSeed Technology Corp. eHome Infrared
>> > Transceiver
>> > Bus 001 Device 002: ID 04f2:0402 Chicony Electronics Co., Ltd Genius
>> > LuxeMate i200 Keyboard
>> > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>>
>> > jerry at squeek:~$ lsmod | grep lirc
>> > ir_lirc_codec 13062 3
>> > lirc_dev 19980 1 ir_lirc_codec
>> > rc_core 28718 13
>> >
>> ir_sharp_decoder,lirc_dev,ir_lirc_codec,ir_rc5_decoder,ir_nec_decoder,ir_sony_decoder,mceusb,ir_mce_kbd_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_sanyo_decoder,rc_rc6_mce
>>
>> > jerry at squeek:~$ ls -l /dev/lirc*
>> > crw------- 1 root root 250, 0 Jun 20 22:55 /dev/lirc0
>> > lrwxrwxrwx 1 root root 15 Jun 20 22:55 /dev/lircd -> /run/lirc/lircd
>>
>> > jerry at squeek:~$ ps aux | grep lirc
>> > root 566 0.0 0.1 33112 2000 ? Ss Jun20 0:00
>> > /usr/sbin/lircd --output=/run/lirc/lircd --device=/dev/lirc0
>>
>> > Any suggestions?
>>
>> > -Jerry
>>
>> Have you read this thread from early this month "Anyone Using LIRC on
>> CentOS 6.6?" A lot of possible issues come up there!
>>
>> Tot mails,
>> Hika mailto:hikavdh at gmail.com
>>
>> "Zonder hoop kun je niet leven
>> Zonder leven is er geen hoop
>> Het eeuwige dilemma
>> Zeker als je hoop moet vernietigen om te kunnen overleven!"
>>
>> De lerende Mens
>>
>>
> Thanks for the pointer, Hika. I spent a few hours fiddling around, mostly
> with ir-keytables. It sees the remote, but it seems to not be interpreting
> the signal properly. Here's is the output of ir-keytables -t. It's not
> seeing any key events, and the scancodes don't look like they're broken up
> correctly. This is from pressing the same button on the remote repeatedly.
>
> Testing events. Please, press CTRL-C to abort.
> 1434950415.277167: event type EV_MSC(0x04): scancode = 0x4007
> 1434950415.277167: event type EV_SYN(0x00).
> 1434950415.629476: event type EV_MSC(0x04): scancode = 0x4007
> 1434950415.629476: event type EV_SYN(0x00).
> 1434950416.141482: event type EV_MSC(0x04): scancode = 0x4007
> 1434950416.141482: event type EV_SYN(0x00).
> 1434950416.333429: event type EV_MSC(0x04): scancode = 0x2003e10
> 1434950416.333429: event type EV_SYN(0x00).
> 1434950417.197495: event type EV_MSC(0x04): scancode = 0x400
> 1434950417.197495: event type EV_SYN(0x00).
> 1434950417.357055: event type EV_MSC(0x04): scancode = 0x400782
> 1434950417.357055: event type EV_SYN(0x00).
> 1434950418.765469: event type EV_MSC(0x04): scancode = 0x2003e10
> 1434950418.765469: event type EV_SYN(0x00).
> 1434950418.893453: event type EV_MSC(0x04): scancode = 0x4007
> 1434950418.893453: event type EV_SYN(0x00).
>
> -Jerry
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mythtv.org/pipermail/mythtv-users/attachments/20150627/763121fb/attachment.html>
More information about the mythtv-users
mailing list