[mythtv-users] Anyone Using LIRC on CentOS 6.6?

[Kirk Bocek]

On 6/4/2015 12:36 AM, Alec Leamas wrote:
> On 04/06/15 08:24, Alec Leamas wrote:
>
>> Anyway, you really need to disable the kernel decoding if you want to
>> use lirc. What kind of write error did " echo -- 'lirc' >
>> /sys/class/rc/rc0/protocols" give? Does /sys/class/rc/rc0 exist? Did you
>> forget to do it as root (permission problem)?"
>
> Oops! Your dmesg (so to speak):
>
> > $ir-keytable
> > Found /sys/class/rc/rc1/ (/dev/input/event14) with:
> >          Driver mceusb, table rc-rc6-mce
> >          Supported protocols: NEC RC-5 RC-6 JVC SONY LIRC
> >          Enabled protocols: LIRC
> >          Name: Media Center Ed. eHome Infrared
> >          bus: 3, vendor/product: 0471:0815, version: 0x0000
> >          Repeat delay = 500 ms, repeat period = 33 ms
>
> Have you reloaded the driver, and thus have the device available on 
> something else than /sys/class/rc/rc0 (here /sys/class/rc/rc1/)? 
> ir-keytable should tell you. Of course, you should then write to the 
> corresponding protocols file to disable kernel decoding.
>
> Also note that you can use "cat /sys/class/rc/rc?/protocols"  to check 
> current status.
>

Argh... still no output from ir-keytable.

$ir-keytable
Found /sys/class/rc/rc4/ (/dev/input/event14) with:
         Driver mceusb, table rc-rc6-mce
         Supported protocols: NEC RC-5 RC-6 JVC SONY LIRC
         Enabled protocols: RC-6
         Name: Media Center Ed. eHome Infrared
         bus: 3, vendor/product: 0471:0815, version: 0x0000
         Repeat delay = 500 ms, repeat period = 33 ms

$ir-keytable -t -d /dev/input/event14
Testing events. Please, press CTRL-C to abort.
^C

ir-keytable -r -d /dev/input/event14
Enabled protocols: NEC RC-5 RC-6 JVC SONY SANYO LIRC RC-5-SZ SHARP 
MCE_KBD XMP

I have the devinput config file in /etc/lirc/lircd.conf. The receiver 
flashes as I press the remote buttons.